Surface texturing and solid lubricants have demonstrated the ability to substantially reduce
friction and wear under dry conditions. In recent decades, these two technologies have been …

Polytetrafluoroethylene (PTFE) is widely used in tribological applications. However, it faces
challenges due to its high wear rate. Reinforcement of additives in PTFE reduces its wear …

Black phosphorus (BP), a newly emerging two-dimensional material, has recently received
considerable attention. Our recent work suggested that BP nanosheets exhibit extraordinary …

Three kinds surface texture was fabricated on CuSn6 bronze disc by laser texturing. The
tests of textured disc sliding against PTFE material were carried out in dry friction condition …

PTFE/copper composites were prepared by compression molding at room temperature and
subsequent heat treatment in the atmosphere. Transfer films were prepared on a GCr15 disc …

For improving wear resistance of PTFE-based material and performances of ultrasonic
motors, 1-Dimple and 3-Dimple textures were fabricated on stator surface based on …

This study investigates an in-depth analysis of chemical, physical, thermal and tribological
behavior of infused epoxy matrix for applications lowering of dry friction is targeted. Epoxy …

Water‐based anticorrosive coatings have poor water resistance, which easily lead to coating
deterioration and metal corrosion. In order to improve the anticorrosion performance of …

This study fabricated textures on the stator surface of a traveling wave ultrasonic motor
(USM) using laser and investigated the tribological behavior of a polytetrafluoroethylene …

This investigation examines the effects of incorporating graphite as a filler in the
polytetrafluoroethylene (PTFE) topcoat of a polydopamine/PTFE dual-layer coating …