In this study, a biobased phenolic adhesive was successfully developed by entirely
substituting both petroleum-based phenol and formaldehyde with an unmodified corn stover …

The objective of this research was to develop environment-friendly adhesives for face fancy
veneer bonding of engineered flooring using the natural tannin form bark in the wood. The …

This study investigated the curing behavior and viscoelastic properties of two types of tannin-
based adhesives, wattle and pine, with three hardeners: paraformaldehyde …

As a part of abating formaldehyde emissions of urea–formaldehyde (UF) resin adhesives,
using dynamic mechanical analysis (DMA), we attempted to investigate the influence of the …

Wood composites glued with thermosetting synthetic resins tend to show inadequate
dam** performance caused by the cured resinous matrix. Waste rubber maintains …

This paper studies alternative catalysts to ammonium sulfate for curing urea-formaldehyde
(UF) resins. When using a latent catalyst like ammonium sulfate, hexamine is formed as by …

Organosolv wheat straw lignin extracted using the CIMV processTM is a linear, low
molecular weight, and natural phenolic oligomer. In this study, organosolv wheat straw lignin …

The effects of bio‐scavengers on the formaldehyde emission, bonding strength, curing
behavior, and thermal decomposition properties of MF resins for engineered flooring and …

Network formation, cure characteristics and bonding performance of tannin-based resins
were investigated in order to establish structure–property relationships between the stage B …

Abstract One-component polyurethanes (1-c-PUR) are commonly used adhesives for the
manufacture of cross-laminated timber (CLT). Typically, these adhesives do not govern the …