We studied the initial microstructures, mechanical responses and deformation-induced
microstructures of the medium-Al Fe-21Mn-6Al-1C-xSi (x= 0, 1.5, 3 wt.%) lightweight steels …

The natural aging (NA) response of a commercial Al–Zn–Mg alloy has been tracked to
investigate the effects of solute clusters on its mechanical properties. It has been observed …

The hydrogen embrittlement behavior of two stabilized austenitic twinning-induced plasticity
(TWIP) steels under high-pressure thermal hydrogen charging and hydrogen environment …

This work shows, for the first time, a systematic wear and damage analysis on a novelty
roller crusher component used in the iron ore mining industry. Crusher suffers from complex …

High tensile strength of~ 1550 MPa, uniform elongation of~ 30%, and impact energy of~ 80 J
were achieved in a high-C high-Si bainitic steel, by austempering around the nose-tip …

Austenitic high-Mn steels have been nominated as desirable ultra-high-strength cold-rolled
steels whose mechanical properties are greatly improved by powerful deformation …

Low carbon steels containing 15–19 wt% Mn were processed to study the influence of Mn
content on the thermally induced and deformation-induced ε-/α′-martensitic transformation …

Abstract Austenitic high-Mn TWinning-and Transformation-Induced Plasticity (TWIP and
TRIP) steels are strong candidates for GPa-grade cold-rolled steel sheets. The reduction in …

The microstructure and tensile behavior of Fe-8Mn-6Al-0.2 C low density steel were
investigated in the present study. The results show that, after being solution treated at 900° …

The tensile property and microstructure evolution of Fe-22Mn-0.5 C TWIP steel under
different annealing conditions was experimentally investigated. The matrix phase of this …