Machining of hardened steel—experimental investigations, performance modeling and cooling techniques: a review
The researchers have worked on many facets of machining of hardened steel using different
tool materials and came up with their own recommendations. Researchers have tried to …
tool materials and came up with their own recommendations. Researchers have tried to …
State of the art in hard turning
Hard turning is gaining grounds for machining hardened steels as it has several benefits
over grinding. There are several issues, which should be understood and dealt with, to …
over grinding. There are several issues, which should be understood and dealt with, to …
Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL
The rule of thumb in the machining of nickel base superalloys with ceramic tools is to cut dry
and no attempt of applying MQL with the addition of solid lubricant was made, according to …
and no attempt of applying MQL with the addition of solid lubricant was made, according to …
Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method
In this work, the dry turning parameters of two different grades of nitrogen alloyed duplex
stainless steel are optimized by using Taguchi method. The turning operations were carried …
stainless steel are optimized by using Taguchi method. The turning operations were carried …
State of the art review on the sustainable dry machining of advanced materials for multifaceted engineering applications: progressive advancements and directions for …
In this article, the comprehensive review on the application, and indeed, a comparative
analysis on dry machining of different types of materials (Inconel, steel, aluminum, cast iron …
analysis on dry machining of different types of materials (Inconel, steel, aluminum, cast iron …
Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420
The purpose of this experimental work is to study the impact of the machining parameters
(Vc, ap, and f) on the surface roughness criteria (Ra, Rz, and Rt) as well as on the cutting …
(Vc, ap, and f) on the surface roughness criteria (Ra, Rz, and Rt) as well as on the cutting …
Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine
Homogeneous charge compression ignition (HCCI) engines have potential to provide both
diesel like efficiencies and very low NO x and particulate matter (PM) emissions. There is …
diesel like efficiencies and very low NO x and particulate matter (PM) emissions. There is …
Machinability investigations of hardened steel with biodegradable oil-based MQL spray system
Excessive use of coolant is undesirable in machining due to environmental consciousness;
thereby, small but efficacious (improved thermal and tribological properties) amount of …
thereby, small but efficacious (improved thermal and tribological properties) amount of …
Investigations on machinability aspects of hardened AISI 4340 steel at different levels of hardness using coated carbide tools
This study investigates the effect of workpiece hardness, cutting parameters and type of
coating (coated tool) on different machinability aspects like, the tool life, surface roughness …
coating (coated tool) on different machinability aspects like, the tool life, surface roughness …
Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno …
This paper presents the mathematical modelling and parametric optimization on flank wear
and surface roughness based on response surface methodology and grey-based Taguchi …
and surface roughness based on response surface methodology and grey-based Taguchi …