The hot deformation behavior of Al-Mg-Si alloys was investigated by isothermal
compression tests in a temperature range from 400° C to 550° C and a strain rate range from …

Abstract 2195 aluminum alloy is widely used to manufacture the external tanks of space
shuttles and aircraft skins, and its mechanical properties are substantially affected by …

Hot compression tests were conducted on 7055 aluminum alloy under different strain rates,
temperatures, and reduction ratios. The influence of deformation parameters on …

Al–Li alloy is a new structural material with the advantages of lightweight and high strength.
The extrusion profiles of Al–Li alloy are widely used in aerospace and other fields, which …

The hot deformation behavior and microstructural evolution of homogeneous annealed
AA7020 aluminum alloy were investigated by isothermal compression tests over the …

Recently, an efficient integrated forging process has been proposed in which solutionized
aluminum alloy extruded bars are directly hot forged and quenched. In this study, the hot …

The present work explored the impacts of temperature, strain rate, strain and initial
orientation on hot-compression behavior and microstructural evolvement of hot-extruded …

The shear-compression deformation of GH4169 superalloy at 1000–1200° C and 0.01–1 s−
1 was investigated by physical and numerical simulation based on a specific shear …

Abstract Peripheral Coarse Grain (PCG) is an undesirable defect that may occur in the
extrusion of medium-strength Al-Mg-Si aluminum alloys. This phenomenon usually degrade …

To investigate the mechanical properties and constitutive relationship of 6008-T6 aluminum
alloy under dynamic impact loading, dynamic impact and microscopic experiments were …