ABSTRACTs The need for fully dense material with well-engineered microstructures has led
to the promising emergence of innovative sintering technologies among which the Spark …

Nanostructured materials (NsM) are typical materials with structural length scales of one,
two, or three dimensions in the range of 1–100 nm. In the development of NsM, the …

The microstructure, mechanical and tribological properties of Ni–Cr–ZrO 2 composites,
manufactured by using the spark plasma sintering technique with different sintering …

Materials properties are highly dependent on the processing parameters and technique
used during sintering. The effect of Spark Plasma sintering process parameters (pressure …

This article examines the influence of process parameters of Spark plasma sintering (SPS)
technique on the densification and hardness properties of graphene (GNP) reinforced …

The availability of lower-cost titanium with unique properties required for engineering
applications such as in automobile, aerospace and biomedical has created a renewed …

Nanocrystalline nickel powder from pure nickel with an initial particle size of 4–7 μm was
fabricated using high-energy ball mill technique at different milling parameters. The resulting …

In this study, effect of mechanical milling on the mechanical, dry sliding wear and impact
response of spark plasma sintered Ni-17Cr6. 5Co1. 2Mo6Al4W7. 6Ta superalloy has been …

An investigation was carried out to evaluate the isothermal oxidation behavior of nickel
based superalloys at 1100° C for 120 h. The alloys which were microstructured and …

Ni-Cr-ZrO2 composites with varying amounts of ZrO2 additive (5 wt%, 7.5 wt%, 10 wt% and
12.5 wt%) were fabricated using spark plasma sintering method at a sintering temperature of …