Overview of materials used for the basic elements of hydraulic actuators and sealing systems and their surfaces modification methods
The article is an overview of various materials used in power hydraulics for basic hydraulic
actuators components such as cylinders, cylinder caps, pistons, piston rods, glands, and …
actuators components such as cylinders, cylinder caps, pistons, piston rods, glands, and …
Optimization of plasma electrolytic oxidation technological parameters of deformed aluminum alloy D16T in flowing electrolyte
The prospects of plasma electrolytic oxidation (PEO) technology applied for surface
hardening of aluminum alloys are substantiated. The work aims to optimize the …
hardening of aluminum alloys are substantiated. The work aims to optimize the …
Research Progress on the Wear Resistance of Key Components in Agricultural Machinery
Agricultural mechanization is crucial in enhancing production efficiency, alleviating labor
demands, reducing costs, improving agricultural product quality, and promoting sustainable …
demands, reducing costs, improving agricultural product quality, and promoting sustainable …
The effect of heat treatment on the structural-phase state and abrasive wear resistance of a hard-anodized layer on aluminum alloy 1011
The aim of this study was to evaluate the effect of heat treatment on the phase composition,
hardness, and abrasion wear resistance of hard-anodized layers (HAL) on 1011 aluminum …
hardness, and abrasion wear resistance of hard-anodized layers (HAL) on 1011 aluminum …
Study on manufacturing via slip casting and properties of alumina-titanium composite enhanced by Thialite phase
This paper aims to study the Al2O3/Ti ceramic-metal composite obtained by the slip casting
method. Samples containing 50% volume of the solid phase, including 10% volume of the …
method. Samples containing 50% volume of the solid phase, including 10% volume of the …
Study on tribocorrosion properties of cold spray additively manufactured 2024 Al alloy
This study was conducted with a high level of thoroughness. X-ray diffraction (XRD),
Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM) were …
Scanning Electron Microscope (SEM), and Transmission Electron Microscope (TEM) were …
Modification of the surfaces of aluminum and titanium alloys aimed at the improvement of their wear resistance and tribological characteristics
We describe main achievements of the researchers from the Karpenko Physicomechanical
Institute of the NAS of Ukraine in the field of formation of wear-resistant coatings and layers …
Institute of the NAS of Ukraine in the field of formation of wear-resistant coatings and layers …
Characterization of 1050Al/Al3Ni/ZrO2 hybrid surface composites fabricated by friction stir processing
Abstract Al/Al3Ni and Al/nano‐ZrO2 mono and Al/Al3Ni/ZrO2 hybrid composites were
produced by one‐and four‐pass friction stir processing (FSP). Then, the microstructure …
produced by one‐and four‐pass friction stir processing (FSP). Then, the microstructure …
Experimental investigation of wear behaviour of WC-10Co-4Cr-coated SS304 on slurry pot tester
P Khullar, G Singh, S Kumar - World Journal of Engineering, 2025 - emerald.com
Purpose The paper aims to investigate the effects of slurry erosion on hydro turbine
components, focusing on the experimental analysis of SS-304 using sand as the erodent …
components, focusing on the experimental analysis of SS-304 using sand as the erodent …
The tribological properties of plasma electrolytic oxidation layers synthesized on arc spray coatings on aluminum alloys in contact with various friction materials
Oxide layers on the surface of the aluminum alloys D16 and AMg6 and on arc coatings
sprayed with electrode wires made of the alloys D16 and AMg6 were synthesized using …
sprayed with electrode wires made of the alloys D16 and AMg6 were synthesized using …