Metallic materials have long been used in a wide range of industrial applications due to their
outstanding physical and mechanical properties as well as high process latitudes …

AISI 52100 hardened bearing steel is popular in many industrial applications due to its
excellent wear resistance and high strength. Therefore, a high level of surface integrity of the …

The microstructure of machined superficial layer significantly affects the mechanical
properties and service life of mechanical components. Herein, to obtain a machined surface …

Surface texturing of AISI 52100 steel was carried out by photochemical machining. The
geometrical parameters of the textured patterns were inspired by the characteristics of the …

Photochemical Machining (PCM) is a well-known tightly controlled selective corrosion
technique used to manufacture several micro and nano-size components high in quality and …

In the composite's family, the aluminum Metal Matrix Composites (MMC's) especially
Aluminum Beryl ones are the widely used and recognized materials as they possess light …

Co–Cr alloys are widely used in balloon-expandable coronary stents. However, early
fracture of the stents caused by cyclic deformation after placement has been reported. In this …

The study mainly focuses on geometrical topographies in photochemical machining (PCM)
of Monel 400, using two etchants cupric chloride (CuCl2) and ferric chloride (FeCl3). The …

Although the rolling process is significant on develo** the preferred crystallographic
orientation in the metallic sheets, its implementation at the nanoscale is uncertain. However …

In this work, the surface integrity (surface morphology, microstructure, microhardness,
residual stress) of contact fatigue (CF) samples with different numbers of running cycles was …