With the development of the aerospace and automotive industries, high heat exchange
efficiency is a challenge facing the development of various industries. Pure copper has …

Abstract In Additive Manufacturing (AM), parts are normally fabricated along the direction
perpendicular to the build plate. However, the main axis of the part may differ from this …

Electron beam powder bed fusion (EB-PBF) has been given much attention in recent years
for its potential in the aerospace and medical industries, particularly with Ti‐6Al‐4V …

The additive-manufacturing process generally fabricates lattices with geometries that depart
from their as-designed counterparts and some inherent geometric imperfections exist within …

Additive manufacturing techniques can introduce defects that worsen the mechanical
properties of 3D printed parts. Current techniques for quantifying the detrimental effects of …

Various manufacturing defects are known to have significant impact on the mechanical
properties of lattice structures. Therefore, defects-embedded FE models are essential for …

Surface roughness effects on the fatigue behaviour of gyroid cellular Ti-6Al-4 V structures
obtained by additive manufacturing were investigated. The normalized fatigue strength …

The rapid growth of additive manufacturing (AM) technologies has enabled the emergence
of geometrically sophisticated materials or structures with tailored and/or enhanced …

Mechanical response and deformation behavior of Ti-6Al-4V lattice structure are
investigated by quasi-static and low-speed impact compression experiments. The lattice …

Wire and arc additive manufacturing (WAAM) has been used to manufacture ER2319
aluminum alloy lattice structure, whereas a relationship of the struts diameter of lattice …