The effects of aging in seawater and SWSSC and strain rate on the tensile performance of GFRP/BFRP composites: A critical review
Replacing metallic materials (typically carbon steel bars) with fiber reinforced polymer (FRP)
composites to reinforce marine concrete structures can effectively resolve the corrosion …
composites to reinforce marine concrete structures can effectively resolve the corrosion …
[HTML][HTML] Residual stresses in thermoplastic composites–a study of the literature. Part III: Effects of thermal residual stresses
PP Parlevliet, HEN Bersee, A Beukers - Composites Part A: Applied …, 2007 - Elsevier
This paper is the third part in a series of review papers on residual stresses in thermoplastic
composites. The first two parts were dedicated to the formation of thermal residual stresses …
composites. The first two parts were dedicated to the formation of thermal residual stresses …
[PDF][PDF] Matrix microcracking in composites
JA Nairn - Polymer matrix composites, 2000 - cof.orst.edu
The first form of damage in laminates is usually matrix microcracks [1], which are
intralaminar or ply cracks that traverse the thickness of the ply and run parallel to the fibers in …
intralaminar or ply cracks that traverse the thickness of the ply and run parallel to the fibers in …
A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements
Continuous-fiber/epoxy-matrix laminated composites are a key structural material for
aeronautical and aerospace applications. Introducing nanoscale reinforcements to these …
aeronautical and aerospace applications. Introducing nanoscale reinforcements to these …
[HTML][HTML] Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites
Composites are efficient to deal with tensile loads than metals. Now-a-days, metals are
replaced with composites owing to their higher strength to weight ratio and are extensively …
replaced with composites owing to their higher strength to weight ratio and are extensively …
A review of physics-based models in prognostics and health management of laminated composite structures
This article reports on the physics-based models for the diagnosis (detection, isolation,
localization, and quantification of damages) and prognosis (prediction of the future evolution …
localization, and quantification of damages) and prognosis (prediction of the future evolution …
[HTML][HTML] Characterization of sea water ageing effects on mechanical properties of carbon/epoxy composites for tidal turbine blades
In recent years, many tidal turbine projects have been developed using composites blades.
Tidal turbine blades are subject to ocean forces and sea water aggressions, and the …
Tidal turbine blades are subject to ocean forces and sea water aggressions, and the …
Transverse cracking and delamination in cross-ply glass-fiber and carbon-fiber reinforced plastic laminates: static and fatigue loading
JM Berthelot - Appl. Mech. Rev., 2003 - asmedigitalcollection.asme.org
A review of developments and understanding of transverse cracking and delamination in
cross-ply laminates is presented. First, experimental investigations reported in the literature …
cross-ply laminates is presented. First, experimental investigations reported in the literature …
Characterisation and analysis of transverse crack-induced delamination in cross-ply composite laminates under fatigue loadings
The delamination growth represents one of the main phenomena involved in the fatigue
damage evolution in composite laminates. With the aim of characterising qualitatively and …
damage evolution in composite laminates. With the aim of characterising qualitatively and …
Initiation and growth of delamination from the tips of transverse cracks in CFRP cross-ply laminates
Delamination initiation and growth from the tips of the transverse cracks in toughened-type
CFRP (T800H/3631) cross-ply laminates was measured by the replica technique as a …
CFRP (T800H/3631) cross-ply laminates was measured by the replica technique as a …