During the last years, the scientific and industrial community has focused on the astonishing
properties of Fe–Mn–Al–C steels. These high advanced steels allow high-density reductions …

The idea of twin-roll casting (TRC) was first patented by Sir Henry Bessemer in 1857.
Development of the TRC process took more than 100 years and now it is commercialized for …

Light-weight high-manganese steels offer a high potential for industrial application due to
their excellent combination of mechanical properties and reduced density. In the present …

In this work, the additive manufacturing technique of laser powder bed fusion (L-PBF) was
used to build up X30Mn21 austenitic advanced high strength steel (AHSS) samples …

Solidification and segregation characteristics of Fe-Cr-Ni-Mo-N super austenitic stainless
steel were quantitatively analyzed at cooling rate from 0.1 to 90℃/s by means of differential …

Compositional and microstructural heterogeneity are characteristics of modern multiphase
steels. However, the quantitative characterization of these heterogeneities is rarely …

Predicting, understanding, and controlling the mechanical behavior is the most important
task when designing structural materials. Modern alloy systems—in which multiple …

High-manganese steels (HMnS) are alloys with outstanding mechanical properties, but their
application is inhibited by inherent limitations in conventional processing. Additive …

Metal additive manufacturing has strongly gained scientific and industrial importance during
the last decades due to the geometrical flexibility and increased reliability of parts, as well as …

Understanding the complex phase transformations during additive manufacturing (AM) of
low-alloy multi-phase steels is a necessary task to discover the mechanisms that lead to …