Shock compression and spallation of a eutectic high-entropy alloy (HEA) AlCoCrFeNi 2. 1
with lamellar structure are investigated via plate impact loading with free-surface velocity …

The goal of this paper was to assess the dynamic properties of a new class of materials,
High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were …

Abstract The Fe 50 Mn 30 Co 10 Cr 10 high entropy alloy with different martensite phase
content were dynamic loaded at 190 m/s and 420 m/s impact velocity respectively by one …

In this work, we investigated the effects of alloying elements on plastic deformation and
microstructure evolution in polycrystalline copper (Cu) and Cu alloyed with 1 wt.% lead (Cu …

Materials subjected to dynamic environments experience a complex and wide range of
stress, strain, and strain-rate conditions. To have confidence in material models, an …

Spall fracture is a high strain-rate damage phenomenon associated with shock or impulsive
loading events. When a material that has been subjected to shock compression is allowed to …

Duplex stainless steel (DSS) with pronounced microstructural anisotropy, is shock-loaded
along normal direction, transverse direction and rolling direction to investigate the effects of …

The role of the concentration and distribution of the Ta solute in a solid solution in the shock
response and spall failure of a bulk nanocrystalline Cu (nc-Cu) system is investigated using …

In this study, the effects of Cu nanoparticle inclusion on the dynamic responses of single
crystal Al during shockwave loading and subsequent spallation processes have been …

Abstract The Ti-6Al-4V dual phase alloy samples were dynamic loaded by one-stage light
gas gun experiment and samples with initial spallation were softly recovered. During the …