Introducing actives into brazing alloys is a common way to improve their wettability. Typical
interfacial behaviors of added actives involve adsorbing at the liquid/solid interface and …

This work designed a novel TiNiCuNb eutectic alloy for manufacturing C/C-SiC composite
joints. By introducing Ti into the semi-solid TiNiCuNb alloy, low-temperature melting of this …

It has often been observed that the agglomeration and floating of graphene during soldering
graphene nanosheets-reinforced Sn–Ag–Cu (GNSs/SAC) alloys, which considerably …

In this work, alumina ceramic was bonded to itself with composite foils (Ti/Cu/Ni/Cu/Ti). The
thermodynamics analysis indicates that Ti-Cu liquid firstly formed and reacted with alumina …

Liquid metal batteries (LMBs), with the merits of long lifespan and low cost, are deemed as
one of the most promising energy storage technologies for large-scale energy storage …

Expandable graphite is widely used as a new functional carbon material, especially as fire-
retardant; however, its practical application is limited due to the high expansion temperature …

In the present work, a reliable TZM/graphite heterogeneous joint was prepared by vacuum
brazing with Ti-35Ni alloy. The influence of brazing temperature on the interfacial …

Joining between C/C composites and single crystal Ni-based superalloy is of great
significance to promote their wide application in aerospace. A sound joint of them is …

Joining single-crystal diamond with the Kovar alloy has great application potential in the
field of optoelectronic devices. In this work, single-crystal diamond was brazed with a Kovar …

Copper based composites with high graphite contents for pantograph sliders have been
manufactured via an inexpensive powder metallurgy method. Large size cluster graphite is …