In recent year, advancement of the materials and processing of the material identified as
research zone to make an impact in aerospace, automobile, marine and bio-medical …

Fusion welding causes joint deterioration when joining aluminum alloys, which limits the use
of aluminum alloy components in high-end equipment. This paper focuses on an overview of …

Metal 3D printing through laser powder bed fusion (L-PBF) has revolutionised the
manufacturing industry. However, size limitations and production costs persist as challenges …

After friction stir processing (FSP), fine equiaxed α-Al grains formed in the weld nugget (WN)
of 6063 Al alloy, and their size increased with increasing tool rotation speed in the range of …

In this study, the effect of non-isothermal aging on the microstructure and mechanical
properties of AA2024-16 wt% Ag coating is investigated. The AA2024-Ag composite is …

In this work, an efficiency of various pre-strain paths for suppression of abnormal grain
growth in friction-stir welded 6061-T6 aluminum alloy was studied. To this end, the produced …

Two half-disk samples of pure Al and pure Zn were mechanically alloyed via high-pressure
torsion (HPT) processing, followed by post-deformation annealing (PDA). The microstructure …

The effects of Ag on the microstructure, mechanical properties, and electrical conductivity of
AA2024 aluminum alloy coating were investigated. It was fabricated by friction surfacing as …

This study investigated the effect of Zn interlayers on the dissimilar friction stir welding of
A1050 pure aluminium and S45C carbon steel. Two joints were made by adding Zn foils of …

The present study investigated the effect of zinc powder on the microstructure and
mechanical properties of Al–Mg alloy friction surfaced on an AA5052 aluminum alloy …