Laminated metal composites (LMCs) are a unique composite material and have great
application prospects in automobiles, ships, aircraft, and other manufacturing industries. As …

As the lightest metal structural materials, Mg alloys have great application potential in
transportation, aerospace, and biomedicine. However, the further application is hindered by …

Abstract Eleven-layered AZ31/AA1050 composite plates were fabricated using a single-shot
explosive welding process. The microstructural evolution of the interfacial layers were …

Abstract In this study, Mg/Al bimetallic composite tubes were prepared by direct extrusion-
shear deformation (DESD) process. First, the influence of the shear deformation process on …

The microstructure and texture of an Al1050/AZ31/Al1050 laminated composite fabricated by
accumulative roll bonding at 400° C up to 5 cycles are investigated using Electron …

Al (1060)/Mg (AZ31)/Al (1060) multilayered composite was successfully produced using an
accumulative roll bonding (ARB) process for up to four cycles at an elevated temperature …

In the present study, a well bonded Mg/Al laminate containing a soft Mg AZ31 sleeve and an
ultra hard Al 7050 core was successfully fabricated by extrusion directly from the as-cast …

The law of microstructure evolution and mechanical properties of hot roll bonded Cu/Mo/Cu
clad sheets were systematically investigated and the theoretical prediction model of the …

Solid-state ultrasonic spot welding (USW) was used to join Al/Mg/Al tri-layered clad sheets,
aiming at exploring weldability and identifying failure mode in relation to the welding energy …

Dissimilar joining of magnesium and aluminum using a compound casting process was
investigated in the present work. For the first time, a Ni interlayer prepared by plasma …