Carbon capture and storage update

ME Boot-Handford, JC Abanades… - Energy & …, 2014 - pubs.rsc.org
In recent years, Carbon Capture and Storage (Sequestration)(CCS) has been proposed as a
potential method to allow the continued use of fossil-fuelled power stations whilst preventing …

The Calcium-Loo** technology for CO2 capture: On the important roles of energy integration and sorbent behavior

A Perejón, LM Romeo, Y Lara, P Lisbona, A Martínez… - Applied Energy, 2016 - Elsevier
Abstract The Calcium Loo** (CaL) technology, based on the multicyclic carbonation/
calcination of CaO in gas–solid fluidized bed reactors at high temperature, has emerged in …

Sorbents for the Capture of CO2 and Other Acid Gases: A Review

C Halliday, TA Hatton - Industrial & Engineering Chemistry …, 2021 - ACS Publications
The processes that produce CO2 and other acid gases (SO x, NO x, and H2S) generate
value for society. However, these gases are environmental pollutants, and their emission …

A review of developments in pilot-plant testing and modelling of calcium loo** process for CO 2 capture from power generation systems

DP Hanak, EJ Anthony, V Manovic - Energy & Environmental Science, 2015 - pubs.rsc.org
A nearly complete decarbonisation of the power sector is essential to meet the European
Union target for greenhouse gas emissions reduction. Carbon capture and storage …

Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption

N Hedin, L Andersson, L Bergström, J Yan - Applied Energy, 2013 - Elsevier
In general, the post-combustion capture of CO2 is costly; however, swing adsorption
processes can reduce these costs under certain conditions. This review highlights the issues …

Demonstration of steady state CO2 capture in a 1.7 MWth calcium loo** pilot

B Arias, ME Diego, JC Abanades, M Lorenzo… - International Journal of …, 2013 - Elsevier
Calcium loo**, CaL, is rapidly develo** as a postcombustion CO 2 capture technology
because its similarity to existing power plants using circulating fluidized bed combustors …

The calcium loo** cycle for CO2 capture from power generation, cement manufacture and hydrogen production

CC Dean, J Blamey, NH Florin, MJ Al-Jeboori… - … Research and Design, 2011 - Elsevier
Calcium loo** is a CO 2 capture scheme using solid CaO-based sorbents to remove CO 2
from flue gases, eg, from a power plant, producing a concentrated stream of CO 2 (∼ 95%) …

High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants

PES Jiménez, A Perejón, MB Guerrero, JM Valverde… - Applied energy, 2019 - Elsevier
High energy density, cycling stability, low cost and scalability are the main features required
for thermochemical energy storage systems to achieve a feasible integration in …

A review of techno-economic models for the retrofitting of conventional pulverised-coal power plants for post-combustion capture (PCC) of CO 2

M Zhao, AI Minett, AT Harris - Energy & Environmental Science, 2013 - pubs.rsc.org
In this paper, we compare and contrast the four most promising (ie commercially viable in
the near future) technologies for the post-combustion capture (PCC) of CO2 that can be …

[HTML][HTML] Towards decarbonisation of sugar refineries by calcium loo**: Process integration, energy optimisation and technoeconomic assessment

B Bazooyar, A Nabavi, P Clough, EJ Anthony… - Energy Conversion and …, 2024 - Elsevier
The sugar refinery process as a food industry is at the pinnacle of the energy hierarchy.
Depending on the source of carbon in this industry that could be either from biomass or …