Ni-based superalloys play an important role in aircraft engine propulsion. However, many
experiments demonstrated that these alloys as well as Ni always show ductility loss at …

Conventional alloy design based on a single primary element has reached its limits in terms
of performance optimization. An alloy design strategy with multi-principal elements has …

Ti-bearing high-entropy superalloys (HESAs) often suffer from severe intergranular
embrittlement and terrible oxidation degradation at intermediate temperatures. Here we …

Grain size effects on the early plastic strain localization and slip transfer at grain boundaries
were investigated for the Alloy 718 Ni-based superalloy at 650° C. Three microstructures …

In the present study alloy 600 was tested in simulated pressurised water reactor (PWR)
primary water, at 360° C, under an hydrogen partial pressure of 30kPa. These testing …

The purpose of this study was to investigate oxidation assisted crack growth phenomena
encountered in nickel-based alloys at high temperatures. Fatigue crack growth tests …

This paper is concerned with the intergranular crack tip oxidation mechanism in alloy 718 at
elevated temperatures. The basic concept is based on the ability of the oxygen partial …

A ReaxFF reactive force field was developed for the nickel–oxygen system. The quantum
mechanical (QM) data used to derive the force field parameters included the equations of …

The effect of building direction and post fabrication aging treatment on the microstructure,
crystallographic texture and high temperature mechanical properties of Inconel 718 (IN718) …

Low cycle fatigue (LCF) is an important consideration in the design and operation of high
temperature systems that are subjected to repeated thermal stresses as a result of …