In order to investigate the influence of service temperature on the mechanical properties of
Ti–5Al-2.5 Sn ELI titanium alloy, the tensile tests were performed on the polycrystalline Ti …

Dissimilar titanium alloys TC4/TA7 are welded by using electron beam welding (EBW), and
the microstructure and mechanical properties of welded joints are systematically …

For the first time, electron beam powder bed fusion (EB-PBF) is verified to be feasible to
additively manufacture high-performance titanium alloy components for ultra-low …

The microstructure and corrosion fatigue behavior under artificial seawater environment of
100-mm-thick Ti–6Al–4V alloy joint via vacuum electron beam welding (EBW) was …

The microstructure, microhardness, tensile properties, and fracture characteristics of the
laser welded Ti–10V–2Fe–3Al (Ti1023) titanium alloy in the as-welded condition were …

The microhardness curve trend and its relationships with microstructure and misorientation
were analyzed to enhance the comprehension of the microstructure and mechanical …

Abstract In this paper, Ti-5Al-2.5 Sn ELI α titanium alloy was prepared by laser powder bed
fusion. The effects of heat treatment and HIP process on the densification behavior …

The stainless steel/Ti/low-carbon steel trimetallic composite plate was successfully
fabricated by the explosive welding technique using honeycomb aluminum structure low …

In most cases, welding processes promote the application of structural materials at the
expense of strength and ductility. Post-weld treatment is proposed to regain mechanical …

In this letter, the residual stress (RS) induced by the high vacuum (2 x 10− 4 mbar) electron
beam welding (EBW) of two high strength steels (HSS) ie quenched and tempered (Q+ T) …