A series of Al 2 O 3 coatings have been prepared on steel substrate by multi-chamber gas-
dynamic accelerator. The coatings (200 μm thick) were deposited in 6 passes in the three …

This paper investigates the influence of the technological parameters of detonation spraying
on the phase composition of NiCr-and Al2O3-based coatings. It was determined that the …

Detonation spraying is a kind of thermal spray process, widely applied to produce dense,
hard coatings on engineering surfaces with the least porosity and higher adhesive strength …

The main aim of present work is to enhance effectively the working life of boron steel
(medium carbon steel, 22BMn5) having application in agricultural implements. Process was …

The present work deals with the coating of mild steel using plasma spray coating technique
to improve surface properties for various industrial applications. Three different composite …

The influence of detonation spraying parameters on the porosity and adhesion of (Ti, Cr) C–
Ni coatings was studied. These detonation coatings were applied from (Ti, Cr) C-based …

The present paper reports the analysis of wear behavior and surface properties of
detonation gun-sprayed composite coating of chromium carbide–nichrome–cerium oxide …

In this work, hot corrosion surface behaviour of bare and CNT reinforced Al2O3 coated T-11
boiler steels has been studied. Cyclic oxidation studies in molten salt (Na2SO4-60% V2O5) …

ABSTRACT Detonation Gun (D-Gun) Spray Coating is a widely used surface strengthening
process applicable for many machine elements and engineering components. D-Gun …

In the past, coating have been developed to provide defensive shield against corrosion and
erosion that is to protect the substrate material from chemical as well as physical interaction …