This work gives an overview of the production, properties and industrial applications of metal
foams. First, it classifies the most relevant manufacturing routes and methods. Then, it …

For the rational manipulation of the production quality of high-temperature metallurgical
engineering, there are many challenges in understanding the processes involved because …

This book describes in detail the scientific philosophy of the formation and stabilization-
destabilization of foams. It presents all hierarchical steps of a foam, starting from the …

Stoichiometric TiH 2 nano-crystalline powder with particle mean size of less than 30 nm was
synthesized for the first time via the Guen-Miller Flow-Levitation method. Details of the …

MAX phase ceramics are typically prepared by the reactive sintering of elemental powders
that are often coarse, expensive, and prone to oxidation. The temperature-driven …

This study fabricated aluminum (AlSi10Mg) foam using a directed energy deposition (DED)
process. The foaming properties and microstructures are comparatively analyzed for …

In the present work, the continual annealing and roll-bonding (CAR) process was applied to
produce a novel aluminum nanocomposite foam by applying 0.75 TiH 2 and 0.75 nano-SiC …

The phase transformation and its relation to the porosity of Ti-Al base alloys are investigated
in order to understand the effect of composition on the pore formation during sintering at low …

In this work, Ni–P compounds were deposited on titanium hydride (TiH 2) by the electroless
plating method and the possible chemical reactions were studied in a broad temperature …

Metal foams have become a prominent research material in the past decade due to their low
specific gravity and high energy absorption capacity. Recently a new method of metal foam …