A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)
A Anders - Surface and Coatings Technology, 2014 - Elsevier
High power impulse magnetron sputtering (HiPIMS) has been at the center of attention over
the last years as it is an emerging physical vapor deposition (PVD) technology that …
the last years as it is an emerging physical vapor deposition (PVD) technology that …
Review of metal oxide films deposited by filtered cathodic vacuum arc technique
Cathodic vacuum arc is a deposition technique which exhibits unique properties, such as
high ion energy, high ionization rate and multiple ion charge states, depending on the …
high ion energy, high ionization rate and multiple ion charge states, depending on the …
Oxygen vacancy and hole conduction in amorphous TiO 2
The amorphous titanium dioxide (a-TiO2) has drawn attention recently due to the finding that
it holds promise for coating conventional photoelectrodes for corrosion protection while still …
it holds promise for coating conventional photoelectrodes for corrosion protection while still …
TiO2 thin films–Influence of annealing temperature on structural, optical and photocatalytic properties
Nanostructured TiO2 thin films were deposited on glass substrates by sol–gel dip coating
technique. The structural, morphological and optical characterizations of the as deposited …
technique. The structural, morphological and optical characterizations of the as deposited …
Optical properties of anatase TiO2 thin films prepared by aqueous sol–gel process at low temperature
Z Wang, U Helmersson, PO Käll - Thin Solid Films, 2002 - Elsevier
TiO2 thin films were spin-coated on Si (100) substrates via an aqueous sol–gel route using
Ti (OBun) 4 and H2O2 as starting materials, and were annealed in air at different …
Ti (OBun) 4 and H2O2 as starting materials, and were annealed in air at different …
Room temperature deposition of a TiO 2 thin film from aqueous peroxotitanate solution
A transparent, high purity, amorphous titanium dioxide thin film composed of densely packed
nanometer-sized grains has been successfully deposited on a glass substrate at room …
nanometer-sized grains has been successfully deposited on a glass substrate at room …
Deposition and modification of titanium dioxide thin films by filtered arc deposition
A Bendavid, PJ Martin, H Takikawa - Thin solid films, 2000 - Elsevier
Thin films of titanium dioxide have been deposited on glass substrates and conducting (100)
silicon wafers by filtered arc deposition (FAD). The influence of the depositing Ti− energy …
silicon wafers by filtered arc deposition (FAD). The influence of the depositing Ti− energy …
Triphasic Metal Oxide Photocatalyst for Reaction Site‐Specific Production of Hydrogen Peroxide from Oxygen Reduction and Water Oxidation
The search for photocatalysts allowing the highly active, selective, and stable conversion of
molecular oxygen into hydrogen peroxide is of worldwide interest. Here, the authors report …
molecular oxygen into hydrogen peroxide is of worldwide interest. Here, the authors report …
Anatase–rutile transformation through high-temperature annealing of titania films produced by ultrasonic spray pyrolysis
A Nakaruk, D Ragazzon, CC Sorrell - Thin Solid Films, 2010 - Elsevier
Titanium dioxide films were prepared by ultrasonic spray pyrolysis on (0001) α-quartz
substrates at 400° C and/or annealed in air at 600°, 800°, or 1000° C. The as-deposited …
substrates at 400° C and/or annealed in air at 600°, 800°, or 1000° C. The as-deposited …
Effect of sputtering target power on microstructure and mechanical properties of nanocomposite nc-TiN/a-SiNx thin films
Nanocrystalline TiN has been imbedded in amorphous silicon nitride matrix to form a super
hard nanocomposite thin film (nc-TiN/a-SiNx) via magnetron sputtering. Adjusting Ti and …
hard nanocomposite thin film (nc-TiN/a-SiNx) via magnetron sputtering. Adjusting Ti and …