Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores
In this study, the pitting behaviors of wrought and SLM 316L SSs (stainless steels) are
comparatively investigated under the conditions of different aggressiveness. The …
comparatively investigated under the conditions of different aggressiveness. The …
Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment
D Kong, C Dong, X Ni, L Zhang, H Luo, R Li, L Wang… - Corrosion …, 2020 - Elsevier
The effect of hydrogen charging on the microstructure and durability of traditional wrought
and selective laser melted 316L stainless steels (SLMed 316L SSs) in a proton exchange …
and selective laser melted 316L stainless steels (SLMed 316L SSs) in a proton exchange …
Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy
Y Qiao, D Xu, S Wang, Y Ma, J Chen, Y Wang… - Journal of Materials …, 2021 - Elsevier
The effect of hydrogen charging on microstructural evolution and corrosion behavior of a Ti-
4Al-2V-1Mo-1Fe alloy in a 3.5 wt.% NaCl solution was investigated. The results showed that …
4Al-2V-1Mo-1Fe alloy in a 3.5 wt.% NaCl solution was investigated. The results showed that …
Corrosion resistance of 13wt.% Cr martensitic stainless steels: Additively manufactured CX versus wrought Ni-containing AISI 420
The corrosion resistance of heat-treated additively manufactured (AM) precipitation
hardening martensitic stainless steel (SS) CX and wrought components of AISI 420-SS with …
hardening martensitic stainless steel (SS) CX and wrought components of AISI 420-SS with …
The semiconducting properties of passive films formed on AISI 316 L and AISI 321 stainless steels: A test of the point defect model (PDM)
A Fattah-Alhosseini, F Soltani, F Shirsalimi, B Ezadi… - Corrosion …, 2011 - Elsevier
The semiconductor properties of passive films formed on AISI 316L in 1M H2SO4 in three
temperatures and AISI 321 in 0.5 M H2SO4 were studied by employing Mott–Schottky …
temperatures and AISI 321 in 0.5 M H2SO4 were studied by employing Mott–Schottky …
Effect of solution concentration on semiconducting properties of passive films formed on austenitic stainless steels
The semiconductor properties of passive films formed on AISI 316L in three acidic solutions
were studied by employing Mott–Schottky analysis in conjunction with the point defect model …
were studied by employing Mott–Schottky analysis in conjunction with the point defect model …
Microstructure and corrosion resistance properties of (FeCoNi) 86Al7Ti7 high-entropy alloy via different aging time
H Cheng, H Luo, X Wang, X Li - Corrosion Science, 2024 - Elsevier
The effects of heat treatment processes with different aging times on the corrosion behavior
and passive film properties of the (FeCoNi) 86 Al 7 Ti 7 high-entropy alloy were investigated …
and passive film properties of the (FeCoNi) 86 Al 7 Ti 7 high-entropy alloy were investigated …
Corrosion and passive behavior of Al0. 8CrFeNi2. 2 eutectic high entropy alloy in different media
X Wan, A Lan, M Zhang, X **, H Yang… - Journal of Alloys and …, 2023 - Elsevier
The electrochemical corrosion behavior and passive film properties formed on the as-cast
Co-free Al 0.8 CrFeNi 2.2 eutectic high entropy alloy (EHEA) in different media (0.5 M NaCl …
Co-free Al 0.8 CrFeNi 2.2 eutectic high entropy alloy (EHEA) in different media (0.5 M NaCl …
Slurry erosion–corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl …
Y Wang, YG Zheng, W Ke, WH Sun, WL Hou… - Corrosion …, 2011 - Elsevier
Corrosion and slurry erosion–corrosion (E–C) behaviour of FeCrMoMnWBCSi amorphous
metallic coatings (AMCs) compared with 304 stainless steel was investigated by static …
metallic coatings (AMCs) compared with 304 stainless steel was investigated by static …
Designing for high corrosion-resistant high nitrogen martensitic stainless steel based on DFT calculation and pressurized metallurgy method
H Feng, HB Li, ZH Jiang, T Zhang, N Dong, SC Zhang… - Corrosion …, 2019 - Elsevier
In this work, a new high corrosion resistant martensitic stainless steel (MSS) containing high
nitrogen content (N> 0.33 wt.%) was designed based on density functional theory (DFT) …
nitrogen content (N> 0.33 wt.%) was designed based on density functional theory (DFT) …