Newly emerging applications of halloysite nanotubes: a review
Halloysite nanotubes (HNTs) are types of naturally occurring 1: 1 clays with nanotubular
structures and similar chemical composition to kaolin. Due to various characteristics such as …
structures and similar chemical composition to kaolin. Due to various characteristics such as …
Polymer micro and nanocomposites: structure, interactions, properties
J Moczo, B Pukanszky - Journal of Industrial and Engineering Chemistry, 2008 - Elsevier
The characteristics of all heterogeneous polymer systems including composites containing
either micro or nanofillers are determined by four factors: component properties …
either micro or nanofillers are determined by four factors: component properties …
Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites
Liu, IY Phang, L Shen, SY Chow, WD Zhang - Macromolecules, 2004 - ACS Publications
Multiwalled carbon nanotubes (MWNTs)/nylon-6 (PA6) nanocomposites with different
MWNTs loadings have been prepared by the simple melt-compounding approach. A fine …
MWNTs loadings have been prepared by the simple melt-compounding approach. A fine …
The effect of filler particle size on the antibacterial properties of compounded polymer/silver fibers
Antibacterial activity has become a significant property of textiles used in applications such
as medicine, clothing, and household products. In this study, we compounded …
as medicine, clothing, and household products. In this study, we compounded …
Carbon nanotubes reinforced nylon-6 composite prepared by simple melt-compounding
WD Zhang, L Shen, IY Phang, T Liu - Macromolecules, 2004 - ACS Publications
Because of their high aspect ratio, nanosize in diameter, very low density, and, more
importantly, excellent physical properties (such as extremely high mechanical strength, high …
importantly, excellent physical properties (such as extremely high mechanical strength, high …
Chitosan/polyamide nanofibers prepared by Forcespinning® technology: A new adsorbent to remove anionic dyes from aqueous solutions
Chitosan/polyamide nanofibers (CP nanofibers) were prepared by a new Forcespinning®
technology, and used as alternative adsorbent to remove Reactive Black 5 (RB5) and …
technology, and used as alternative adsorbent to remove Reactive Black 5 (RB5) and …
A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibres
A range of multi-wall carbon nanotubes and carbon nanofibres were mixed with a polyamide-
12 matrix using a twin-screw microextruder, and the resulting blends spun to produce a …
12 matrix using a twin-screw microextruder, and the resulting blends spun to produce a …
Highly efficient extraction of uranium from seawater by polyamide and amidoxime co-functionalized MXene
D Zhang, L Liu, B Zhao, X Wang, H Pang, S Yu - Environmental Pollution, 2023 - Elsevier
Uranium mainly exists in the form of uranyl carbonate in seawater.[UO 2 (CO 3) 3] 4-has
strong stability, which increases the difficulty of uranium extraction from seawater …
strong stability, which increases the difficulty of uranium extraction from seawater …
Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: Influence of the clay content and dispersion state: Consequences …
E Picard, A Vermogen, JF Gérard, E Espuche - Journal of Membrane …, 2007 - Elsevier
Polyamide 6-montmorillonites membranes have been prepared and studied for a large
range of clay content (from 0 to 18wt.%). The barrier properties of these systems have been …
range of clay content (from 0 to 18wt.%). The barrier properties of these systems have been …
[HTML][HTML] Preparation, morphology and thermal/mechanical properties of epoxy/nanoclay composite
A novel approach assisted with solvent was developed to disperse clay into epoxy matrix.
The dispersion of clay was examined by means of optical microscopy (OM), wide angle X …
The dispersion of clay was examined by means of optical microscopy (OM), wide angle X …