The content of Zn and Mg directly influences the microstructure characteristics of Al–Zn–Mg–
Cu alloys. In the present study, the solidification phases of three as-cast Al–Zn–Mg–Cu …

The evolution mechanism of the second phase in the homogenization process of Al-Zn-Mg-
Cu aluminum alloy was thoroughly investigated. The results revealed that the phase …

This paper aims to understand the influence of microalloying constituents (Ti, Zr, Sr and Sc),
and three heat treatment conditions ie, T6, retrogression and reaging (RRA) and high …

An investigation was conducted to study the influence of peak-ageing and double ageing
treatments in the precipitation along the different grain boundary orientations of an extruded …

The hot deformation behavior of an Al-Mg-Si-Zr-Mn alloy was investigated by performing
uniaxial compression tests over a temperature range of 400–550° C and strain-rate range of …

A 6061 Al alloy build consisting of 3 additive layers was successfully fabricated using a
sheet-based friction stir additive manufacturing process. The study focused on analyzing the …

The effects of homogenization temperature at 465° C and different homogenization times
(6h/12h/24h/36/h/48h) on the microstructure and mechanical properties of as-cast 7075 …

This work comprehensively studied the microstructure evolution and thermodynamic
behavior of homogenized cast Al-Mg-Si alloy by using the dynamic materials model (DMM) …

Equal channel angular pressing (ECAP) is an efficient metal forming tool, generally used to
improve the mechanical properties by refining the grain structure in metals and alloys. In the …

In this work, the microstructural evolution and mechanical behavior of as-cast Al–5Mg alloys
with various tin (Sn) contents were investigated. Combined with microstructure …