An overview of the AC-DC and DC-DC converters for LED lighting applications

M Arias, A Vázquez, J Sebastián - automatika, 2012 - Taylor & Francis
High-Brightness Light Emitting Diodes (HB-LEDs) are considered the future trend in lighting
not only due to their high efficiency and high reliability, but also due to their other …

High-efficiency LED driver without electrolytic capacitor for street lighting

M Arias, DG Lamar, J Sebastián… - IEEE Transactions …, 2012 - ieeexplore.ieee.org
High-brightness light-emitting diodes (LEDs) are considered as a remarkable lighting device
due to their high reliability, chromatic variety, and increasing efficiency. As a consequence, a …

High-efficiency DC–DC converter with twin bus for dimmable LED lighting

W Yu, JS Lai, H Ma, C Zheng - IEEE Transactions on Power …, 2011 - ieeexplore.ieee.org
An improved twin-bus converter using n+ 1 active switches is proposed for the n-string LEDs
to be dimmable from true zero to the rated current level. The n-switches that perform the …

Capacitance reduction with an optimized converter connection applied to LED drivers

D Camponogara, DR Vargas… - IEEE Transactions …, 2014 - ieeexplore.ieee.org
This paper presents a new control method and a detailed project methodology for the
optimized connection method of two converters, aiming to reduce the redundant power …

Flyboost power factor correction cell and a new family of single-stage AC/DC converters

S Luo, W Qiu, W Wu, I Batarseh - IEEE Transactions on Power …, 2005 - ieeexplore.ieee.org
A novel power factor correction (PFC) cell, called flyboost, is presented. The proposed PFC
cell combines power conversion characteristics of conventional flyback and boost …

High-efficiency and wide-bandwidth performance obtainable from a two-input buck converter

J Sebastián, PJ Villegas, F Nuno… - IEEE Transactions on …, 1998 - ieeexplore.ieee.org
A study of the two-input post-regulators is carried out in this paper. In these post-regulators,
only a part of the total power undergoes a switching conversion process, whereas the …

Analysis and design of a single-stage parallel AC-to-DC converter

HY Li, HC Chen, LK Chang - IEEE Transactions on Power …, 2009 - ieeexplore.ieee.org
In this paper, a single-stage (\rmS^2) parallel ac-to-dc converter based on single-switch two-
output boost–flyback converter is presented. The converter contains two semistages. One is …

Power Factor Correction Circuits

MH Rashid, A Kouzou - Power Electronics Handbook, 2024 - Elsevier
This chapter presents an overview of various active harmonic reduction and power factor
correction (PFC) techniques applied in single-phase power supply feeding DC-DC …

Power factor correction circuits

A Kouzou - Power Electronics Handbook, 2018 - Elsevier
This chapter presents an overview of various active harmonic reduction and power factor
correction (PFC) techniques applied in single-phase power supply feeding DC-DC …

Analysis and design of a practical discontinuous-conduction-mode BIFRED converter

MJ Willers, MG Egan, S Daly… - IEEE transactions on …, 1999 - ieeexplore.ieee.org
Impending international standards on harmonic current levels drawn by single-phase mains-
operated equipment have created a need for low-cost off-line power-factor-corrected …