The study of heterostructured materials (HSMs) answered one of the most pressing
questions in the metallurgical field:“is it possible to greatly increase both the strength and the …

The transformation-induced plasticity (TRIP) in advanced high-strength steels (AHSS) is
reviewed, where the main concepts and the recent progress in the processing and …

Recent progress in the understanding of the deformation-induced martensitic transformation,
the transformation-induced plasticity (TRIP) effect, and the reversion annealing in the …

Thermal mechanisms of microstructural refinement in steels were reviewed. These include
thermal cycling, martensite process, and static recrystallization (SRX), in which the dominant …

The evolution of mechanical properties of an AISI 316L austenitic stainless steel was studied
during cold rolling via unidirectional and cross-rolling routes. It was shown that the low …

The phenomena occurring during continuous heating of cold-rolled AISI 304L and AISI 316L
stainless steels from room temperature up to 1150° C were studied. X-ray diffraction (XRD) …

An appropriate fraction of a second phase for controlling the dynamic grain growth of the fine-
grained microstructure during hot deformation can be easily achieved for the high and …

As an implant material, Cu-bearing austenitic stainless steels can possess the antibacterial
property, but their mechanical strength is low. In order to improve the yield strength of a …

The grain size of duplex 2205 stainless steel is controlled by cold rolling followed by
annealing, where grain refinement and grain coarsening are achieved via primary …

Heterostructured materials (HSMs) can alleviate the strength-ductility trade-off of
conventional materials. Microstructure modulation by low-cost and large-scalable thermo …