Molten salt-assisted synthesis of Ce4O7/Bi4MoO9 heterojunction photocatalysts for Photo-Fenton degradation of tetracycline: Enhanced mechanism, degradation …

G Yang, Y Liang, Z **ong, J Yang, K Wang… - Chemical Engineering …, 2021 - Elsevier
Photo-Fenton as an advanced oxidation technology has been proved as a multifunctional
strategy for environmental remediation. In this study, a novel Ce 4 O 7 modified Bi 4 MoO 9 …

Crystal defect-mediated {0 1 0} facets of Bi2MoO6 nanosheets for removal of TC: Enhanced mechanism and degradation pathway

G Yang, YA Zhu, Y Liang, J Yang, K Wang, Z Zeng… - Applied Surface …, 2021 - Elsevier
The engineering of crystal defects on photocatalytic materials has been widely proven as a
versatile strategy to achieve the effective conversion of solar energy in environmental …

The production of bio-jet fuel from palm oil derived alkanes

CH Lin, YK Chen, WC Wang - Fuel, 2020 - Elsevier
Bio-jet fuel currently represents one of the solutions for reducing the emissions from aircraft
without engine modifications. This study mainly focused on producing the jet fuel blendstock …

CrOx modified particles size and electronic density of Ni catalyst on ZSM-23 for enhanced hydroisomerization performance of long-chain n-alkanes

Z Wang, X Jia, Z Yan, W Fu, Z Li, T Tang, L Zhang - Fuel, 2024 - Elsevier
CrO x-doped Ni catalysts with different Ni/Cr mass ratios on ZSM-23 (Ni m Cr n/ZSM-23)
were synthesized using a simple initial wet impregnation method. The influence of CrO x on …

Multiscale aspects in hydrocracking: from reaction mechanism over catalysts to kinetics and industrial application

JW Thybaut, GB Marin - Advances in catalysis, 2016 - Elsevier
Hydroisomerization and hydrocracking are widely recognized as versatile reactions. They
allow not only converting feeds of various origin and quality into high-value blendstocks but …

Study on the preparation and n-heptane isomerization performance of MoO x-Pd/Ce-MCM-48 catalyst

Y Cui, X Dong, Z Jiang, Y Suo, W Zhang, Y Wang - RSC advances, 2024 - pubs.rsc.org
A Ce-MCM-48 molecular sieve was prepared by the hydrothermal synthesis method. Using
Ce-MCM-48 as the support, a series of MoOx Pd/Ce-M catalysts were prepared by the …

C5–C7 linear alkane hydroisomerization over MoO3–ZrO2 and Pt/MoO3–ZrO2 catalysts

S Triwahyono, AA Jalil, NN Ruslan, HD Setiabudi… - Journal of …, 2013 - Elsevier
The catalytic activity of MoO3–ZrO2 and Pt/MoO3–ZrO2 has been assessed based on the
C5–C7 linear alkane hydroisomerization in a microcatalytic pulse reactor at 323–623K. The …

NiCu bimetallic catalysts derived from layered double hydroxides for hydroconversion of n-heptane

Y Zhu, M Yang, Z Zhang, Z An, J Zhang, X Shu… - Chinese Chemical …, 2022 - Elsevier
Supported NiCu bimetallic catalysts have been produced in-situ on commercial Al 2 O 3 by
using layered double hydroxides as precursors. The resulting catalysts show a uniform Ni …

Enhanced activity and selectivity in n-octane isomerization using a bifunctional SCILL catalyst

C Meyer, V Hager, W Schwieger, P Wasserscheid - Journal of Catalysis, 2012 - Elsevier
Bifunctional Solid Catalyst with Ionic Liquid Layer (SCILL) systems are presented and
applied in the skeleton isomerization of n-octane in a slurry-phase reaction mode. It is …

Semi-industrial studies of Tungsten-based catalyst for hydroisomerization/hydrocracking of n-hexane and n-heptane

M Hasan, AM Mohamed, H Al-Kandari - Molecular Catalysis, 2018 - Elsevier
Abstract WO 3/TiO 2 (WTi) composite was prepared via an environmentally friendly, fast and
facile wet impregnation method using distilled water as the solvent. The catalyst composite …