Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Hot oxidation and corrosion behaviour of boiler steel fabricated by wire arc additive manufacturing
Boiler Steels undergo severe degradation in corrosion resistance due to oxide scale
formation at elevated temperatures. In this study, the comparative hot oxidation and hot …
formation at elevated temperatures. In this study, the comparative hot oxidation and hot …
Investigation of austenitic stainless steel corrosion resistance against ash deposits from co-combustion coal and biomass waste
A high chromium concentration in the boiler material is believed to increase corrosion
resistance, especially at high temperatures. It is related to the formation of a protective layer …
resistance, especially at high temperatures. It is related to the formation of a protective layer …
[HTML][HTML] High-temperature corrosion in a multifuel circulating fluidized bed (CFB) boiler co-firing refuse derived fuel (RDF) and hard coal
In this work samples of corrosion products collected from waterwalls made of P235GH and
16Mo3 steel are investigated. The samples originated from a full-scale circulating fluidized …
16Mo3 steel are investigated. The samples originated from a full-scale circulating fluidized …
Study of KCl-induced hot corrosion behavior of high velocity oxy-fuel sprayed NiCrAlY and NiCrBSi coatings deposited on 12CrMoV boiler steel at 700℃
X Liu, K Hu, S Zhang, T Xu, L Chen, E Byon, D Liu - Corrosion Science, 2022 - Elsevier
The hot corrosion behavior of two kind of HVOF-sprayed NiCr-based coatings with different
oxide-forming elements (such as Al and Si) was investigated and compared in the presence …
oxide-forming elements (such as Al and Si) was investigated and compared in the presence …
Microstructure and hot corrosion performance of stainless steel 347 produced by wire arc additive manufacturing
The present work reports the feasibility of wire arc additive manufacturing (WAAM) process
to manufacture SS 347 components for high temperature applications. The microstructure of …
to manufacture SS 347 components for high temperature applications. The microstructure of …
Comparative hot corrosion performance of APS and Detonation sprayed CoCrAlY, NiCoCrAlY and NiCr coatings on T91 boiler steel
Hot corrosion performance of Atmospheric Plasma Spray (APS) and Detonation spray (DSC)
CoCrAlY, NiCoCrAlY, and NiCr coatings on T91 steel were investigated at 650° C for 100 …
CoCrAlY, NiCoCrAlY, and NiCr coatings on T91 steel were investigated at 650° C for 100 …
The effect of Y2O3 nanoparticle addition on the microstructure and high-temperature corrosion resistance of IN718 deposited by extreme high-speed laser cladding
F Lin, Z Wang, X Xu, K Luo, J Lu - Surface and Coatings Technology, 2024 - Elsevier
The microstructural evolution and 700° C high temperature corrosion resistance of Y 2 O
3/IN718 composite coatings with different Y 2 O 3 contents (0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) …
3/IN718 composite coatings with different Y 2 O 3 contents (0, 0.5, 1.0, 1.5, 2.0, and 3.0 wt%) …
Hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25 functionally graded material at 700° C and 900° C
K Luo, S Li, G Xu, SRE Hosseini, J Lu - Corrosion Science, 2022 - Elsevier
The hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25
functionally graded materials (FGMs) coated with 75% Na 2 SO 4+ 25% NaCl molten salt at …
functionally graded materials (FGMs) coated with 75% Na 2 SO 4+ 25% NaCl molten salt at …
Improving the hot corrosion resistance of additively manufactured Inconel 718 via recrystallization-based grain boundary engineering induced by its residual stress
B Liu, H Zhang, J Xu, Y Gao, X Yang, B Zhen… - Materials Today …, 2024 - Elsevier
Metals containing abundant coherent twin boundaries (TBs) can improve corrosion
resistance. Tailoring TBs in additive manufacturing (AM)-fabricated metallic materials with …
resistance. Tailoring TBs in additive manufacturing (AM)-fabricated metallic materials with …
High temperature corrosion behavior of Ni and Co base HVOF coatings exposed to NaCl-KCl salt mixture
The high-temperature corrosion behavior of NiMoCrW and CoNiCrAlY base coatings
produced by high velocity oxy-fuel technique (HVOF) has been analyzed in dry air …
produced by high velocity oxy-fuel technique (HVOF) has been analyzed in dry air …