Considerable progress has been made over the last decades in thermal spray technologies,
practices and applications. However, like other technologies, they have to continuously …

Components working under harsh environments in power generation, marine, and
aerospace sectors are subjected to severe surface degradation because of wear, corrosion …

This work studies the effect of mechanical properties and microstructure on sliding wear and
cavitation erosion behaviors of cermet coatings deposited via high velocity oxy-fuel (HVOF) …

Abstract In this research, Laser Cladding (LC) of three different alloys powders, two iron-
based (AISI 4140 and SS420) and a Cobalt-based (Stellite 6) was performed on a Grey Cast …

In the present work erosive and abrasive wear behaviour of HVOF deposited WC-12Co, WC–
10Co–4Cr and Cr 3 C 2− 25NiCr coatings was investigated. The maximum wear rate was …

This paper provides a comprehensive characterisation of HVOF-and HVAF-sprayed Cr 3 C 2–
25 wt.% NiCr hardmetal coatings. One commercial powder composition with two different …

Gray cast iron (GCI) is a popular automotive brake disc material by virtue of its high melting
point as well as excellent heat storage and dam** capability. GCI is also attractive …

Thermally sprayed hardmetal coatings are widely used to protect components and surfaces
against wear in various applications. Hard and wear resistant coatings increase the …

Thermally sprayed tungsten carbide (WC) and chromium carbide (Cr 3 C 2) based hard
metal coatings are commonly applied on component surfaces as corrosion and wear …

Material and spray process selection are the key factors in the tailoring of thermal sprayed
coatings for demanding industrial applications. In this study, four commercial Cr 3 C 2-based …