Reduced maintenance costs of concrete structures can be ensured by efficient and
comprehensive condition assessment. Ground-penetrating radar (GPR) has been widely …

The corrosion and passive behavior of the as-cast Al x CrFeNi 3− x (x= 0.6, 0.8, 1.0 in molar
ratio) high entropy alloys in 3.5 wt% NaCl solution at room temperature was investigated by …

This work studied the influence of cold deformation on the microstructure evolution and
corrosion behavior of selective laser melted (SLMed) 316L stainless steel in a simulated …

Fine gas-atomized powders were prepared for fabricating 316L stainless steel by selective
laser melting (SLM) for medical implant applications. The effect of 3D printing laser power on …

Microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser
melting (SLM) for bipolar plate were investigated and the subsequent heat treatment effect …

The literature is reviewed with respect to defining, measuring, and interpreting the chloride
threshold (CT). CT was defined with a strong fundamental basis in the Point Defect Model …

The passive film properties of as-received selective laser-melted 316L stainless steel
(SLMed 316L SS) without obvious pores were studied and compared with those of wrought …

Abstract The FCC+ B2/BCC structure of AlCrFeNi 3 Cu x (x= 0 eutectic, x= 0.2, 0.4 hypo-
eutectic, x= 0.6, 0.8, 1.0 dendritic) high-entropy alloys were fabricated and corrosion …

The effect of tensile elastic stress on passivation behavior and surface chemistry of 2205
duplex stainless steel is investigated. Elastic stress increases the potential drop at the …

Additive manufacturing (AM) is an emerging technology to produce engineering
components. However, the major challenge in the practical application of AM is the …