The heterogeneous structure of Al alloys renders them susceptible to localized corrosion
due to the different electrochemical properties existing in the Al-rich solid solution matrix and …

Specially prepared 6xxx series aluminium alloys (Al–Mg–Si) with different Mg/Si ratios and
Cu contents were investigated in the naturally aged, under-aged, peak-aged and over-aged …

The corrosion performance of 6xxx series Al alloys has been found to depend on small
changes in composition and microstructure. The corrosion behaviors of three aluminum …

The effects of the electrochemical nature of intermetallic particles (IMPs) and dislocation
density on the localised pitting corrosion behaviour of Alsingle bondSisingle bondMgsingle …

The microstructure and intergranular corrosion have been studied in an extruded and aged
Al-Mg-Si alloy doped with 0.05 wt% Cu after immersing the material in an acidified salt …

Abstract 6xxx series (Al–Mg–Si) alloys are generally known to be greatly susceptible to
localized corrosion, which is closely related to the presence of coarse intermetallic …

The intergranular corrosion (IGC) susceptibility of 2024 Al alloy during re–ageing after
solution treating and cold–rolling was investigated by accelerated corrosion testing, open …

In this study, property criteria for automotive Al-Mg-Si sheet alloys are outlined and
investigated in the context of commercial alloys AA6016, AA6005A, AA6063 and AA6013 …

New longer-term observations of corrosion and pitting of 6060-grade aluminium alloy
showed that the most intensive pitting and corrosion occurred in the marine immersion zone …

The influence of quench cooling rate on corrosion behaviour of AA6082-T6 Al-Mg-Si alloy
extrusion is investigated. It is revealed that different quench cooling rates result in significant …