Recent Advances in Synthesis and Applications of MFe2O4 (M = Co, Cu, Mn, Ni, Zn) Nanoparticles
In the last decade, research on the synthesis and characterization of nanosized ferrites has
highly increased and a wide range of new applications for these materials have been …
highly increased and a wide range of new applications for these materials have been …
Recent advances in kaolinite-based material for photocatalysts
The composite catalytic materials based on the mineral kaolinite are considered to be a
potential approach for solving global energy scarcity and environmental pollution, which …
potential approach for solving global energy scarcity and environmental pollution, which …
Investigation of Structural, Morphological and Magnetic Properties of MFe2O4 (M = Co, Ni, Zn, Cu, Mn) Obtained by Thermal Decomposition
The structural, morphological and magnetic properties of MFe2O4 (M= Co, Ni, Zn, Cu, Mn)
type ferrites produced by thermal decomposition at 700 and 1000° C were studied. The …
type ferrites produced by thermal decomposition at 700 and 1000° C were studied. The …
Study of synthesis and characterization of triple ions modified bismuth ferrite for electronic devices:(Bi1/2Li1/2)(Fe1/3Mn1/3W1/3) O3
A high-temperature solid-state reaction technique was used to create a lead-free complex
perovskite compound of a chemical composition (Bi 1/2 Li 1/2)(Fe 1/3 Mn 1/3 W 1/3) O 3 …
perovskite compound of a chemical composition (Bi 1/2 Li 1/2)(Fe 1/3 Mn 1/3 W 1/3) O 3 …
Formation, Structure and Magnetic Properties of MFe2O4@SiO2 (M = Co, Mn, Zn, Ni, Cu) Nanocomposites
The formation, structure, and thermal and magnetic properties of MFe2O4@ SiO2 (M= Co,
Mn, Zn, Ni, Cu)(60% MFe2O4/40% SiO2) nanocomposites produced by a modified sol-gel …
Mn, Zn, Ni, Cu)(60% MFe2O4/40% SiO2) nanocomposites produced by a modified sol-gel …
Comparison of copper-based Cu-Ni and Cu-Fe nanoparticles synthesized via laser ablation for magnetic hyperthermia and antibacterial applications
This work used the arc melting technique to fabricate copper-iron and copper-nickel bulk
alloys that were subsequently used to prepare spherical Cu–Fe and Cu–Ni nanoparticles …
alloys that were subsequently used to prepare spherical Cu–Fe and Cu–Ni nanoparticles …
Nanomaterials
A Behera, A Behera - Advanced Materials: An Introduction to Modern …, 2022 - Springer
This chapter describes nanomaterials with respect to nanoscience and nanotechnology in
the 1–100 nm range. The history gives a wonderful idea of how the gradual development of …
the 1–100 nm range. The history gives a wonderful idea of how the gradual development of …
Development and characterization of copper doped perovskite-polymer composite through high-temperature technique
Ceramic powders of Cu doped lead Titanate (Pb0. 5Cu0. 5TiO3) are synthesized through a
solid-state reaction method at high-temperature. Different percentage of ceramic filler into …
solid-state reaction method at high-temperature. Different percentage of ceramic filler into …
Structural, morphological and magnetic properties of MgxCo1 − xFe2O4 Nps by co-precipitation method
MS Raja Seetharaman, P Sivagurunathan - Journal of Materials Science …, 2023 - Springer
In the present work, spinel ferrites with the chemical formula of Mg x Co1− x Fe2O4 (x= 0.3,
0.5, 0.7) Nps were successfully synthesized by co-precipitation method. The structural …
0.5, 0.7) Nps were successfully synthesized by co-precipitation method. The structural …
Narrowing of band gap and decrease in dielectric loss in La1-x Sr x MnO3 for x = 0.0, 0.1, and 0.2 manganite nanoparticles
Polycrystalline compounds of lanthanum strontium manganite (La1-x Sr x MnO3, LSMO) are
widely used in electronic storage devices due to their minimal losses and electronic charge …
widely used in electronic storage devices due to their minimal losses and electronic charge …