Mix design considerations for foamed bitumen stabilized materials: A review

PG Mondal, KK Kuna - Construction and Building Materials, 2022 - Elsevier
Both economic and environmental drivers are strong in support of low-energy technologies
such as bitumen-stabilisation with foamed bitumen. The resulting material of such bitumen …

Analysis of mechanism and time-temperature equivalent effects of asphalt binder in short-term aging

W Ye, W Jiang, P Li, D Yuan, J Shan, J **ao - Construction and Building …, 2019 - Elsevier
The degradation of asphalt pavement performance is severely affected by the aging of
asphalt. In order to improve the anti-aging performance of asphalt, it is necessary to study …

Effects of the water-based foaming process on the basic and rheological properties of bitumen 70/100

M Iwański, A Chomicz-Kowalska, G Mazurek… - Materials, 2021 - mdpi.com
The process of water-based foaming of bitumen produces binders that can be incorporated
in cold recycled asphalt mixes and pavement upper structural layers made of half-warm mix …

Bitumen foaming optimisation process on the basis of rheological properties

M Iwański, G Mazurek, P Buczyński - Materials, 2018 - mdpi.com
This article discusses the results of bitumen foam properties optimisation with respect to
three factors: air pressure, bitumen temperature and amount of water. The test materials …

Influence of foaming water content on foam asphalt mixtures

BW Hailesilassie, M Hugener, MN Partl - Construction and Building …, 2015 - Elsevier
Warm mix asphalt technology using foamed bitumen is being used widely despite the fact
that high air void content and poor coating of large aggregate remain major drawbacks …

Synergistic effect of F–T synthetic wax and surface-active agent content on the properties and foaming characteristics of bitumen 50/70

MM Iwański - Materials, 2021 - mdpi.com
The level of the properties of bituminous mixtures produced with water foamed bitumen
relies on the optimum characteristics of the bitumen. One way to achieve the desired …

Influence of base asphalt aging levels on the foaming characteristics and rheological properties of foamed asphalt

F Dong, X Yu, T Wang, L Yin, N Li, J Si, J Li - Construction and Building …, 2018 - Elsevier
Foamed asphalt technique is widely used in road construction due to its environmental and
economic effects. The various characteristics of foamed asphalt and mixtures have already …

Characteristics of asphalt binders foamed in the laboratory to produce warm mix asphalt

ZA Arega, A Bhasin, W Li, DE Newcomb… - Journal of Materials in …, 2014 - ascelibrary.org
Foamed asphalt binders are increasingly being used to produce warm mix asphalt. This
paper presents the findings from a study conducted to (1) identify a repeatable and accurate …

Laboratory investigation on foamed bitumen bound mixtures made with steel slag, foundry sand, bottom ash and reclaimed asphalt pavement

M Pasetto, N Baldo - Road Materials and Pavement Design, 2012 - Taylor & Francis
The paper describes an experimental investigation on foamed bitumen bound mixtures for
road pavements, with the aggregate matrix entirely composed of industrial by-products, such …

Effect of Surface Active Agent (SAA) on 50/70 Bitumen Foaming Characteristics

MM Iwański, A Chomicz-Kowalska, K Maciejewski - Materials, 2019 - mdpi.com
To ensure the standard properties of half-warm asphalt (HWA) mixes produced with foamed
bitumen, the binder needs to have the best possible characteristics. One way to attain this is …