Processing and properties of reversion-treated austenitic stainless steels
Strength properties of annealed austenitic stainless steels are relatively low and therefore
improvements are desired for constructional applications. The reversion of deformation …
improvements are desired for constructional applications. The reversion of deformation …
Phase reversion-induced nanostructured austenitic alloys: an overview
The potential of the concept of phase reversion process to obtain nanograined (NG)
structure with high strength–high ductility combination and to fundamentally understand the …
structure with high strength–high ductility combination and to fundamentally understand the …
Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
FK Yan, GZ Liu, NR Tao, K Lu - Acta Materialia, 2012 - Elsevier
By means of dynamic plastic deformation (DPD) with high strain rates, a bulk nanostructured
316L austenitic stainless steel consisting of nano-sized grains embedded with bundles of …
316L austenitic stainless steel consisting of nano-sized grains embedded with bundles of …
Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel
A remarkable Lüders-type localized deformation having a huge Lüders strain of 0.4 was
observed in tensile deformation of an ultra-fine grained austenitic stainless steel fabricated …
observed in tensile deformation of an ultra-fine grained austenitic stainless steel fabricated …
Revisiting stacking fault energy of steels
A Das - Metallurgical and materials transactions A, 2016 - Springer
The stacking fault energy plays an important role in the transition of deformation
microstructure. This energy is strongly dependent on the concentration of alloying elements …
microstructure. This energy is strongly dependent on the concentration of alloying elements …
The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr–9Mn–Ni–Cu stainless steel
In order to improve understanding on the behavior of ultrafine-grained austenitic stainless
steels during deformation, the influence of the austenite grain size and microstructure on the …
steels during deformation, the influence of the austenite grain size and microstructure on the …
Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical …
A comprehensive study was carried out on the strain-induced martensitic transformation, its
reversion to austenite, the resultant grain refinement, and the enhancement of strength and …
reversion to austenite, the resultant grain refinement, and the enhancement of strength and …
Constitutive modeling of the mechanical properties of V-added medium manganese TRIP steel
S Lee, Y Estrin, BC De Cooman - Metallurgical and Materials Transactions …, 2013 - Springer
In this study, medium Mn transformation-induced plasticity steel with the composition Fe-
0.08 pct C-6.15 pct Mn-1.5 pct Si-2.0 pct Al-0.08 pct V was investigated. After intercritical …
0.08 pct C-6.15 pct Mn-1.5 pct Si-2.0 pct Al-0.08 pct V was investigated. After intercritical …
Evading strength-ductility trade-off dilemma in TRIP-assisted Fe50Mn30Co10Cr10 duplex high-entropy alloys via flash annealing and deep cryogenic treatments
Conventional and multi-component alloys frequently compromise ductility to strike a balance
between strength and ductility through intricate thermomechanical processes. Hence, it is …
between strength and ductility through intricate thermomechanical processes. Hence, it is …
Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing
In the present study, the concept of phase reversion developed by Misra's group (references
2, 4, 14–16, 25) was adopted to process a 304 austenitic stainless steel and explore the …
2, 4, 14–16, 25) was adopted to process a 304 austenitic stainless steel and explore the …