Toxicity measurement in biological wastewater treatment processes: a review
Y **ao, C De Araujo, CC Sze, DC Stuckey - Journal of hazardous materials, 2015 - Elsevier
Biological wastewater treatment processes (WWTPs), by nature of their reliance on
biological entities to degrade organics and sometimes remove nutrients, are vulnerable to …
biological entities to degrade organics and sometimes remove nutrients, are vulnerable to …
Operating cost and treatment of metalworking fluid wastewater by chemical coagulation and electrocoagulation processes
E Demirbas, M Kobya - Process Safety and Environmental Protection, 2017 - Elsevier
The present study dealt with treatment performances and operating cost of real
metalworking fluid wastewater (MWFW) using chemical coagulation (CC) and …
metalworking fluid wastewater (MWFW) using chemical coagulation (CC) and …
On the limitation of Fenton oxidation operational parameters: a review
The literature on the use of Fenton oxidation in wastewater treatment has established the
method as one of the most effective and suitable methods for recalcitrant wastewater …
method as one of the most effective and suitable methods for recalcitrant wastewater …
A holistic Fenton oxidation-biodegradation system for treatment of phenol from coke oven wastewater: Optimization, toxicity analysis and phylogenetic analysis
In this study, the efficacy of a hybrid treatment approach by integrating Fenton's oxidation
with biological treatment for removal of phenol from synthetic coke oven wastewater was …
with biological treatment for removal of phenol from synthetic coke oven wastewater was …
Cutting oil-water emulsion wastewater treatment by microwave assisted catalytic wet peroxide oxidation
Cutting-oil in water emulsions (COWE) suppose an environmental threat due to their high
volume, stability and low biodegradability (BOD 5/COD: 0.07). So far, these effluents have …
volume, stability and low biodegradability (BOD 5/COD: 0.07). So far, these effluents have …
Variation of the toxicity caused by key contaminants in industrial wastewater along the treatment train of Fenton-activated sludge-advanced oxidation processes
X Li, H Yang, J Pan, T Liu, X Cao, H Ma, X Wang… - Science of The Total …, 2023 - Elsevier
Industrial wastewater contains a mixture of refractory and hazardous pollutants that have
comprehensive toxic effects. We investigated the treatment of a long-chain industrial …
comprehensive toxic effects. We investigated the treatment of a long-chain industrial …
Microorganisms in spent water-miscible metalworking fluids as a resource of strains for their disposal
Metalworking fluids (MWFs) are essential components for modern metalworking
technologies. The volume of world consumption of diluted working solutions exceeds 20 …
technologies. The volume of world consumption of diluted working solutions exceeds 20 …
A novel hybrid nano zerovalent iron initiated oxidation–Biological degradation approach for remediation of recalcitrant waste metalworking fluids
S Jagadevan, M Jayamurthy, P Dobson, IP Thompson - Water research, 2012 - Elsevier
Disposal of operationally exhausted metal working fluids (MWF) through a biological route is
an attractive option, since it is effective with relatively low energy demands. However, it is …
an attractive option, since it is effective with relatively low energy demands. However, it is …
Treatment of industrial wastewater contaminated with recalcitrant metal working fluids by the photo-Fenton process as post-treatment for DAF
Post-treatment of the industrial wastewater polluted by metalworking fluids (MWFs) was
performed using the photo-Fenton process in following of the chemical addition-dissolved …
performed using the photo-Fenton process in following of the chemical addition-dissolved …
[HTML][HTML] Optimising zero-valent iron from industrial waste using a modified air-Fenton system to treat cutting oil wastewater using response surface methodology
W Srimoke, V Kanokkantapong, N Supakata… - Arabian Journal of …, 2022 - Elsevier
This study investigates the treatment of cutting oil wastewater from the automotive parts
manufacturing industry to promote sustainability via the use of 'used shot blasts', which are …
manufacturing industry to promote sustainability via the use of 'used shot blasts', which are …