Direct seawater electrolysis is promising for sustainable hydrogen gas (H2) production.
However, the chloride ions in seawater lead to side reactions and corrosion, which result in …

Solar power has prominently been showing potential as a means to sustainable,
dispatchable and affordable source of energy while attracting huge attention for scientists as …

Detailed understanding of localised corrosion phenomena induced by inclusions in low-
alloy steel is extremely critical as any corrosion-induced premature failure can potentially …

Electrolysis for producing hydrogen powered by renewable electricity can be dramatically
expanded by adapting different electrolytes (brine, seawater or pure water), which means …

The use of molten-salt–based energy production and storage systems requires high-
temperature corrosion-and creep-resistant structural materials. This study investigated the …

The hot corrosion behaviors of a novel Ni16Cr13Co4Mo alloy were investigated in molten
NaCl-KCl and NaCl-KCl-Na 2 SO 4 through electrochemical measurements, GIXRD and …

The effect of FeCl 3 addition on the corrosion of 316 stainless steel (316SS) in NaCl-MgCl 2
salts at 600° C was studied through a static corrosion test. FeCl 3 added into NaCl-MgCl 2 …

The effect of Graphite on the corrosion of Type 316L stainless steel (SS) was investigated in
molten FLiNaK (LiF-NaF-KF: 46.5− 11.5− 42 mol.%) salt using electrochemical methods …

The corrosion behavior of 316L and 316H stainless steels (low and high carbon,
respectively) in molten LiF-NaF-KF (FLiNaK) salt at 700° C for 500 h has been investigated …

The molten salt corrosion performance of a Ni–Mo–Cr (GH3535) alloy weldment, produced
using matching filler metal, was assessed. Corrosion testing was performed in FLiNaK …