Asymmetric stress-controlled fatigue ie, ratcheting behaviour of a non-conventional stainless
steel X12CrMnNiN17-7-5 has been investigated with varying mean stresses, stress …

This investigation examines low temperature tensile deformation behavior of AISI 304LN
stainless steel along with synergistic analysis of acoustic emission signals. The tensile tests …

In this paper, experiment and FE analyses are performed to investigate crack tip deformation
and stress fields under monotonic and large amplitude cyclic loading. Fracture tests using C …

The recently developed austenitic-martensitic TRIP cast steel Fe–14Cr–3Ni–3Mn–0.4 Si–
0.11 N–0.15 C was subjected to different Quenching & Partitioning (Q&P) treatments in order …

Uniaxial tensile tests were conducted on AISI 316LN austenitic stainless steel from− 40 to
300° C at a rate of 0.5 mm/min. Microstructure and mechanical properties of the deformed …

In this study, failure analysis of a thermostatic mixing valve pointer rod made of AISI 304
stainless steel was performed. Visual examination, followed by an in-depth microstructural …

The phenomenon of ratcheting occurs under the influence of non-zero mean stress during
cyclic loading; it singificantly reduces the low cycle fatigue life of engineering structures. The …

The present investigation systematically represents for the first time the density and role of
characteristic dislocations in controlling ratcheting and ratcheting–creep behavior of A356 Al …

Ratcheting fatigue behavior of a non-conventional stainless steel X12CrMnNiN17-7-5 has
been investigated with varying combinations of mean stress (σ m) and stress amplitude (σ a) …

A new method is proposed to determine fracture toughness of structural materials according
to the test data of non-standard small-size chevron-notched specimens. Dur-ing the tests …