Multiband LNAs for software-defined radios: recent advances in the design of multiband reconfigurable LNAs for SDRs in CMOS, microwave integrated circuits …
The last decade has witnessed an increasing number of wireless standards for civil, military,
and space communications. Along with the advances in integrated circuit (IC) technologies …
and space communications. Along with the advances in integrated circuit (IC) technologies …
A 2.4/5.2-GHz concurrent dual-band CMOS low noise amplifier
S Sattar, TZA Zulkifli - IEEE Access, 2017 - ieeexplore.ieee.org
A concurrent dual-band low-noise amplifier (LNA) targeted for W-LAN IEEE 802.11 a/b/g
standards is designed using 0.13-μm CMOS process. To attain the power-constrained …
standards is designed using 0.13-μm CMOS process. To attain the power-constrained …
A low-power reconfigurable narrowband/wideband LNA for cognitive radio-wireless sensor network
This article proposes a low-power reconfigurable multimode low-noise amplifier (LNA) that
can be configured for multiple narrowband as well as wideband operations while providing …
can be configured for multiple narrowband as well as wideband operations while providing …
Finger-regulated simultaneous noise and input matching (FRSNIM) guided CMOS LNA
The multi-finger architecture has been widely explored in submicron CMOS circuits because
it caters to improved device performance compared to its mono-finger counterparts …
it caters to improved device performance compared to its mono-finger counterparts …
Dual-band concurrent LNA with low gain deviation and low noise figure
Y Sawayama, T Morishita, K Komoku… - 2020 IEEE Asia-Pacific …, 2020 - ieeexplore.ieee.org
This paper presents 1.7/3.5 GHz dual-band concurrent LNA with small gain deviation and
low NF. Proposed LNA incorporates mutual induction matching circuit and notch filter …
low NF. Proposed LNA incorporates mutual induction matching circuit and notch filter …
Compact dual-band LNA design using a bridged-T coil-based matching network
JX Chou, CH Wei, YS Lin - 2021 IEEE International …, 2021 - ieeexplore.ieee.org
In this paper, a compact dual-band low-noise amplifier (LNA) is proposed, in which a dual-
band impedance matching network based on the dual-band design of bridged-T coil is …
band impedance matching network based on the dual-band design of bridged-T coil is …
Design of a 2.4 GHz CMOS LNA using two-stage forward body bias technique for WSN application
In this paper, a 2.4 GHz CMOS low noise amplifier (LNA) for wireless sensor network (WSN)
application using CMOS 0.13-μm Silterra technology is presented. The proposed design …
application using CMOS 0.13-μm Silterra technology is presented. The proposed design …
A 5.2 GHz inductorless CNTFET-based amplifier design feasible for on-chip implementation
LM Valdez-Sandoval, A Cid-Delgado… - IEEE Transactions …, 2023 - ieeexplore.ieee.org
The design of single-and double-stage carbon nanotube field-effect transistor (CNTFET)
based power gain amplifiers using an experimentally-calibrated compact model of an …
based power gain amplifiers using an experimentally-calibrated compact model of an …
[HTML][HTML] Dual-Band Low-Noise Amplifier for GNSS Applications
A new dual-band low-noise amplifier (LNA) operating at L1/E1 1.575 GHz and L5/E5 1.192
GHz center frequencies for global navigation satellite system receivers is proposed. A …
GHz center frequencies for global navigation satellite system receivers is proposed. A …
A 1-V 2.4 GHz low-power CMOS LNA using gain-boosting and derivative superposition techniques for WSN
In the literature, for Zigbee receivers using cascode LNAs, a number of techniques such as
gain-boosting, derivative superposition technique and forward body bias have been …
gain-boosting, derivative superposition technique and forward body bias have been …