Dielectric capacitors, which store electrical energy in the form of an electrostatic field via
dielectric polarization, are used in pulsed power electronics due to their high power density …

The demand for dielectric capacitors with higher energy‐storage capability is increasing for
power electronic devices due to the rapid development of electronic industry. Existing …

Ferroelectric materials are well‐suited for a variety of applications because they can offer a
combination of high performance and scaled integration. Examples of note include …

An acetic-acid-based sol–gel method was used to deposit lead lanthanum zirconate titanate
(PLZT, 8/52/48) thin films on either platinized silicon (Pt/Si) or nickel buffered by a lanthanum …

In this work, we demonstrate a very high‐energy density and high‐temperature stability
capacitor based on SrTiO 3‐substituted BiFeO 3 thin films. An energy density of 18.6 J/cm3 …

A micro power generator harvesting vibration energy by resonant inertial oscillation of a
piezoelectric laminated cantilever with proof mass was designed, fabricated, and …

Capacitor technologies are as varied as the applications that they enable, but one of the
common themes in advanced capacitors for consumer electronics is a desire for increased …

Abstract The antiferroelectric/ferroelectric (PbZrO3/PbZr0. 52Ti0. 48O3) bilayer thin films
were fabricated on a Pt (111)/Ti/SiO2/Si substrate using sol‐gel method. PbZr0. 52Ti0. 48O3 …

(100)-oriented Pb 0.97 La 0.02 (Zr 0.95 Ti 0.05) O 3 (PLZT) antiferroelectric films with a
thickness of about 1.7 μm were deposited on Pt-buffered silicon substrates via a sol-gel …

Ferroelectric lead lanthanum zirconate titanate (PLZT) films with 8 mol% lanthanum and
different Zr/Ti ratios (70/30, 65/35, 58/42, 52/48, 45/55, and 40/60) have been grown on …