Large format additive manufacturing (LFAM) technologies are rapidly growing with
significant potential for application in multiple technological sectors like aerospace, tooling …

Cold spray (CS)-fabricated metal–graphene composites have applications in several fields
ranging from tribology and corrosion protection to antibacterial applications. However, it is …

Cold Spray Additive Manufacturing (CSAM) is an emergent technique to produce parts by
the additive method, and, like other technologies, it has pros and cons. Some advantages …

Cu, Ni and Al powders mixed in a certain stoichiometric proportion were ground via ball
milling and deposited as coatings using low pressure cold spraying (LPCS) technology. The …

Cold spray additive manufacturing (CSAM) is generally used to repair worn components and
build complex on-demand parts by depositing metal powder layer-wise using compressed …

This study integrates graphene-based nanostructures as reinforcement in a Ti matrix to
produce coatings using the Cold Gas Spray (CGS) technique, aiming to enhance …

Cold spray (CS) is a solid-state deposition process that accelerates particles in a gas to
create parts or coatings. Deformation is central to the mechanical and metallurgical bonds …

Quasicrystalline Al93Fe3Cr2Ti2 (at.%) gas-atomized powders, which exhibit a metastable
composite microstructure, were used to produce coatings by cold spray additive …

In this study, a novel approach using cold spray additive manufacturing (CSAM) with air as a
carrier gas was employed to 3D print a powder mix comprising 90% Cu and 10% Al. Two …

This study focuses on Inconel 718, one of the most popular Ni-based superalloys for
extreme environments, with high demand for in-situ repair and additive manufacturing …