The interest in nitride coatings based on high-entropy alloys (HEAs) has increased rapidly in
the last decade. According to a number of papers, such high-entropy nitride (HEN) coatings …

Adaptive wear-resistant coatings produced by physical vapor deposition (PVD) are a
relatively new generation of coatings which are attracting attention in the development of …

One challenge for TiAl alloys to serve above 800℃ is insufficient oxidation resistance. In this
article, long-term oxidation of TiAlSiN coated Ti-45Al-2Nb-2Mn, Ti-48Al-2Cr-2Nb and Ti-50Al …

In the present work, experimental investigations carried out to assess the applicability of
HiPIMS (High Power Impulse Magnetron Sputtering)-coated carbide tools to hard turning (55 …

TiAlSiN coatings with different Si content were prepared by hollow cathode discharge (HCD)
and mid-frequency magnetron sputtering (MFMS) hybrid coating deposition technology. The …

TiN-and CrN-based binary or ternary coatings have been used for many years in order to
extend the service life of machining tools. The increasing demands in the metalworking …

To improve oxidation resistance of γ-TiAl based alloys, Ti 0.5 Al 0.4 Si 0.1 N coating was
deposited on Ti48Al2Cr2Nb alloy by arc ion plating system. Ti 0.5 Al 0.5 N coating was also …

To obtain the high hardness and excellent toughness of tool coating, here, the (AlCrSiN/TiN)
20/Ti multilayer multiscale bionic (MB) coatings were prepared on WC-6 wt% Co substrates …

Nanocomposite Ti–Al–Si–N films (Al content ranging from 0 to 16.7 at.% and Si from 0 to
11.8 at.%, respectively) were prepared on Si (100) substrates at 500° C by reactive close …

Multilayered design showed itself to advantage for improvement of functional nitride
coatings, which are widely required in various industry applications. This article reports on …