A review of metastable beta titanium alloys
In this article, we provide a broad and extensive review of beta titanium alloys. Beta titanium
alloys are an important class of alloys that have found use in demanding applications such …
alloys are an important class of alloys that have found use in demanding applications such …
Omega phase in materials
OMEGA PHASE IN MATERIALS Page 1 Progress in Materials Science Vol. 27. pp. 245 to 310.
1982 0079-6425/g2/040245-66533.00j0 Printed in Great Britain. All rights reserved Copyright …
1982 0079-6425/g2/040245-66533.00j0 Printed in Great Britain. All rights reserved Copyright …
A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties
Since its discovery in 1954, the omega (ω) phase in titanium and its alloys has attracted
substantial attention from researchers. The β-to-ω and ω-to-α phase transformations are …
substantial attention from researchers. The β-to-ω and ω-to-α phase transformations are …
ω-Assisted nucleation and growth of α precipitates in the Ti–5Al–5Mo–5V–3Cr–0.5 Fe β titanium alloy
This paper discusses the structural and compositional changes at the nanometer scale
associated with the nucleation and growth of α precipitates in the β titanium alloy Ti-5553 (Ti …
associated with the nucleation and growth of α precipitates in the β titanium alloy Ti-5553 (Ti …
Unprecedented non-hysteretic superelasticity of [001]-oriented NiCoFeGa single crystals
Superelasticity associated with the martensitic transformation has found a broad range of
engineering applications,. However, the intrinsic hysteresis and temperature sensitivity of …
engineering applications,. However, the intrinsic hysteresis and temperature sensitivity of …
Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al
TW Duerig, J Albrecht, D Richter, P Fischer - Acta Metallurgica, 1982 - Elsevier
The formation and reversion behavior of stress induced orthorhombic martensite (α ″) in Ti-
10V-2Fe-3Al has been studied, and several interesting features found. Reversion appears to …
10V-2Fe-3Al has been studied, and several interesting features found. Reversion appears to …
Mechanisms underlying enhanced strength-ductility combinations in TRIP/TWIP Ti-12Mo alloy engineered via isothermal omega precipitation
Abstract β Ti-alloys can achieve a high strain-hardening rate and tensile ductility by taking
advantage of transformation induced plasticity (TRIP) and twinning-induced plasticity (TWIP) …
advantage of transformation induced plasticity (TRIP) and twinning-induced plasticity (TWIP) …
Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium–molybdenum alloys
The ω phase is commonly observed in many commercial β or near-β titanium alloys on
rapidly cooling from the single β phase field and also during subsequent isothermal …
rapidly cooling from the single β phase field and also during subsequent isothermal …
New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys
For multicomponent near-β alloys, we have investigated the mechanisms responsible for the
β-to-ω and ω-to-α phase transformations upon isothermal ageing at 573 K. Experimental …
β-to-ω and ω-to-α phase transformations upon isothermal ageing at 573 K. Experimental …
Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy
A metastable β Ti–10V–3Fe–3Al–0.27 O (wt.%) alloy was subjected to thermo-mechanical
processing to induce α and ω phase formation, so that the alloy can exhibit the features …
processing to induce α and ω phase formation, so that the alloy can exhibit the features …