A molecular dynamics-based model of semi-solid formation from liquid melt of the novel Al–
15Mg2Si–4.5 Si composite is reported in the present study. Growth kinetics of Mg2Si phase …

Rheoprocessing of Al alloys has grabbed attention for quite some time now, due to its
potential to deliver sound engineering components with superior strength to weight ratio …

The present work studies the microstructure and mechanical properties of the Al-7Si-0.3 Mg
alloy, at cooling slope rheocast state, during isothermal holding of the cooling slope …

In the present work, effect of pouring temperature (650° C, 655° C, and 660° C) on semi-
solid microstructure evolution of in-situ magnesium silicide (Mg2Si) reinforced aluminum (Al) …

In this study, the various rheological behaviors such as shear rate, viscosity, and shear
stress of semi-solid slurry of ADC12 Al alloy are investigated. As-received ADC12 Al alloy is …

A comprehensive study is performed to establish the correlation between microstructural
features of the cooling slope-generated slurry (semisolid) of A356 alloy and its non …

High silicon content aluminum alloy (hypereutectic) possess good tribological characteristics
with low coefficients of friction, when embedded with short carbon fiber (C sf), making this …

In semi-solid metal high pressure die casting and in conventional high pressure die casting,
it is common to find a defect band just below the surface of the component. The formation of …

Rheological analysis of an alumina feedstock is carried out to understand its flow behaviour.
The alumina powder is mixed with indigenous binder system (combination of low-density …

The present investigation emphasises on rheological behaviour of semi-solid slurry of
ADC12 Al alloy in order to understand mould filling behaviour during semi-solid processing …