State-of-art on self-lubricating ceramics and application of Cu/CuO as solid lubricant material
BK Singh - Transactions of the Indian Ceramic Society, 2023 - Taylor & Francis
The intention of this paper is to make a comprehensive discussion on self-lubricating
ceramics along with the application of Cu/CuO as a solid lubricant. So, the article starts with …
ceramics along with the application of Cu/CuO as a solid lubricant. So, the article starts with …
[HTML][HTML] Binary and ternary lubricious oxides for high temperature tribological applications: A review
Oxides and oxide-based coatings have been widely used as solid lubricants in demanding
operating conditions to achieve low friction and wear due to their higher thermal and …
operating conditions to achieve low friction and wear due to their higher thermal and …
Performance evaluation of self lubricating CuO added ZTA ceramic inserts in dry turning application
Zirconia toughened alumina (ZTA) ceramic inserts infused with CuO solid lubricant were
fabricated by Hot Press technique and studied. The creation of a Cu-rich phase of ionic …
fabricated by Hot Press technique and studied. The creation of a Cu-rich phase of ionic …
Effect of MWCNTs on micromechanical and high-temperature tribological behavior of ZTA-MgO ceramic composites
Correlating the microstructure and tribo-mechanical properties is a promising approach for
evaluating the performance of any newly decorated high-temperature materials. Aiming to …
evaluating the performance of any newly decorated high-temperature materials. Aiming to …
Fabrication and characterization of silicon carbide and graphite reinforced aluminium matrix composite
Fabrication of Aluminium-based metal matrix composites has proved to be one of the most
promising alternatives to the conventional alloying methodologies in recent times for …
promising alternatives to the conventional alloying methodologies in recent times for …
High temperature tribological performance of molybdenum reinforced zirconia toughened alumina composites prepared by pressure-less sintering
Molybdenum (Mo) reinforced zirconia-toughened alumina (ZTA) composites are a vital class
of self-lubricating ceramics with potential applications as seals, dies and cutting tools …
of self-lubricating ceramics with potential applications as seals, dies and cutting tools …
Mechanical and tribological properties of MgO/multiwalled carbon nanotube-reinforced zirconia-toughened alumina composites developed through spark plasma …
Nanoceramic composites exhibit superior properties over their microcounterparts due to
their microstructural differences. However, achieving grain size reduction in these …
their microstructural differences. However, achieving grain size reduction in these …
Enhancement of Dry Sliding Tribological Characteristics of Perforated Zirconia Toughened Alumina Ceramic Composite Filled With Nano MoS2 in High Vacuum
An innovative approach was adopted for fabricating zirconia toughened alumina (ZTA)-
MoS2 self-lubricating ceramic composites with the inclusion of hydrothermally synthesized …
MoS2 self-lubricating ceramic composites with the inclusion of hydrothermally synthesized …
Comparative study of CuO/ZTA and ZTA composites in terms of functional properties
In this analysis, functional properties of zirconia toughened alumina (ZTA) are improved by
do** 1.5 wt.% copper oxide (CuO). The powders of composites are prepared through co …
do** 1.5 wt.% copper oxide (CuO). The powders of composites are prepared through co …
Little amounts of carbon nanotubes as anti‐wear reinforcement for alumina in dry sliding
Carbon nanotubes (CNTs) are a leading choice for reinforcing oxide and nitride ceramics,
but investigations into the tribological performance of CNT–ceramic composites remain …
but investigations into the tribological performance of CNT–ceramic composites remain …