Superalloys (nickel and titanium-based alloys) are grouped as difficult-to-cut materials.
Therefore, due to poor machinability of superalloys, their machining is a great challenge for …

In the present study, the effect of reduction of cutting fluid consumption on the surface quality
and tool wear was studied. Mathematical models were developed to predict the surface …

Knowing that over two-thirds of lubricant disposals return to the environment with no
purification process, adequate strategies are demanded to reduce their risks. For this …

Unstable crude oil derivatives are among the main substances added to the mineral-based
lubricants (MBL). However, the high purification and disposal costs of such lubricants and …

Machined parts of aluminum alloys are used in a wide range of engineering applications,
such as automobile parts. Many types of tool wear may occur during machining of these …

Dry turning operations are required to be performed during production to achieve
sustainable development goals as per environmental protection guidelines. In such …

Due to the wide applications of aluminum alloy in numerous industrial sectors and products,
significant attention has been paid by many researchers to improve the production and …

摘要本文研究了减少切削液消耗对刀具表面质量和刀具磨损的影响. 利用响应面方法(RSM)
建立了预测表面粗糙度的数学模型, 使用方差分析(ANOVA) 来研究所建立回归模型的有效性 …

با توجه به توانایی بالای تشکیل براده با لبه انباشته در فرآیند ماشینکاری آلومینیم، پژوهش
حاضر به بررسی تاثیر تغییرات بافت سطحی ابزار تنگستن کارباید با هدف کاهش سایش …‎