The manufacturing and applications of the porous metal membranes: A critical review
Metal membrane technology is an environmentally promising method for separation
technology. This green filtration technology has gained much attention than other …
technology. This green filtration technology has gained much attention than other …
Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates
This paper presents a summary of the research on the influence of plasma and cold spray
deposition of bio-grade Ti powder on the high-cycle fatigue properties of Ti6Al4V substrates …
deposition of bio-grade Ti powder on the high-cycle fatigue properties of Ti6Al4V substrates …
Thermal Barrier Coatings: An Insight into Conventional Plasma Spray and Water-Stabilized Plasma Spray
Thermal barrier coating (TBC) systems have presented an ongoing design issue in bids to
improve the lifespan of coatings. A TBC can support an extended lifespan by repairing …
improve the lifespan of coatings. A TBC can support an extended lifespan by repairing …
Benefit or harm of accident tolerant coatings on the low-cycle fatigue properties of Zr-4 cladding alloy: in-situ studies at 400° C
The present work is the first study investigating the effects of accident tolerant coatings on
the low-cycle fatigue life of the Zr-4 alloy. Zr-4 alloy with different accident tolerant coatings …
the low-cycle fatigue life of the Zr-4 alloy. Zr-4 alloy with different accident tolerant coatings …
Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings
FeAl intermetallic coatings were prepared by cold spraying of mechanically alloyed
metastable Fe (Al) powder assisted with post-spray annealing treatment. The microstructure …
metastable Fe (Al) powder assisted with post-spray annealing treatment. The microstructure …
Characterization of microstructure and rolling contact fatigue performance of NiCrBSi/WC–Ni composite coatings prepared by plasma spraying
ZQ Zhang, HD Wang, BS Xu, GS Zhang - Surface and Coatings Technology, 2015 - Elsevier
In this paper, the properties of NiCrBSi/WC–Ni composite coatings deposited by plasma
spraying were analyzed, including their microstructure, element distribution, phase …
spraying were analyzed, including their microstructure, element distribution, phase …
Influence of cold-sprayed, warm-sprayed, and plasma-sprayed layers deposition on fatigue properties of steel specimens
J Cizek, M Matejkova, I Dlouhy, F Siska, CM Kay… - Journal of Thermal …, 2015 - Springer
Titanium powder was deposited onto steel specimens using four thermal spray
technologies: plasma spray, low-pressure cold spray, portable cold spray, and warm spray …
technologies: plasma spray, low-pressure cold spray, portable cold spray, and warm spray …
Oxidation performance of cold spray Ti–Al barrier coated γ-TiAl intermetallic substrates
Four blends of Al powder containing different amounts of Ti were deposited onto Ti–46Al–
7Nb substrates as oxidation–protection layers using low-pressure cold spray. The coating …
7Nb substrates as oxidation–protection layers using low-pressure cold spray. The coating …
Effect of APS Spraying Parameters on the Microstructure Formation of Fe3Al Intermetallics Coatings Using Mechanochemically Synthesized Nanocrystalline Fe-Al …
The present paper presents a study of the behaviour of Fe3Al intermetallic powders particles
based on 86Fe-14Al, 86Fe-14 (Fe5Mg), and 60.8 Fe-39.2 (Ti37. 5Al) compositions obtained …
based on 86Fe-14Al, 86Fe-14 (Fe5Mg), and 60.8 Fe-39.2 (Ti37. 5Al) compositions obtained …
Crystalline oxalic acid aided FeAl intermetallic alloy sintering. Fabrication of intermetallic foam with porosity above 45%
Abstract Intermetallic Fe–Al foam was formed via organic compound assisted sintering. To
the starting mixture of iron and aluminum elemental powders various amount of crystalline …
the starting mixture of iron and aluminum elemental powders various amount of crystalline …