Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
Progress on the application of ELM control schemes to ITER scenarios from the non-active phase to DT operation
Progress in the definition of the requirements for edge localized mode (ELM) control and the
application of ELM control methods both for high fusion performance DT operation and non …
application of ELM control methods both for high fusion performance DT operation and non …
ELM control strategies and tools: status and potential for ITER
Operating ITER in the reference inductive scenario at the design values of I p= 15 MA and Q
DT= 10 requires the achievement of good H-mode confinement that relies on the presence …
DT= 10 requires the achievement of good H-mode confinement that relies on the presence …
Reduction of Edge-Localized Mode Intensity Using High-Repetition-Rate <?format ?>Pellet Injection in Tokamak -Mode Plasmas
High repetition rate injection of deuterium pellets from the low-field side (LFS) of the DIII-D
tokamak is shown to trigger high-frequency edge-localized modes (ELMs) at up to 12× the …
tokamak is shown to trigger high-frequency edge-localized modes (ELMs) at up to 12× the …
ELM mitigation by supersonic molecular beam injection into the H-mode pedestal in the HL-2A tokamak
WW **ao, PH Diamond, XL Zou, JQ Dong… - Nuclear …, 2012 - iopscience.iop.org
Density profiles in the pedestal region (H-mode) are measured in HL-2A and the
characteristics of the density pedestal are described. Cold particle deposition by supersonic …
characteristics of the density pedestal are described. Cold particle deposition by supersonic …
First observations of ELM triggering by injected lithium granules in EAST
The first results of edge-localized mode (ELM) pacing using small spherical lithium granules
injected mechanically into H-mode discharges are reported. Triggering of ELMs was …
injected mechanically into H-mode discharges are reported. Triggering of ELMs was …
High frequency pacing of edge localized modes by injection of lithium granules in DIII-D H-mode discharges
A newly installed Lithium Granule Injector (LGI) was used to pace edge localized modes
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
(ELM) in DIII-D. ELM pacing efficiency was studied injecting lithium granules of nominal …
Modelling of edge localised modes and edge localised mode control
Edge Localised Modes (ELMs) in ITER Q= 10 H-mode plasmas are likely to lead to large
transient heat loads to the divertor. To avoid an ELM induced reduction of the divertor …
transient heat loads to the divertor. To avoid an ELM induced reduction of the divertor …
ELM pacing and trigger investigations at JET with the new ITER-like wall
PT Lang, D Frigione, A Géraud, T Alarcon… - Nuclear …, 2013 - iopscience.iop.org
During the installation of the new ITER-like wall (ILW) at JET, the high frequency pellet
injector has been further improved. The launching system is now capable of delivering …
injector has been further improved. The launching system is now capable of delivering …
ELM control experiments in the KSTAR device
The fourth KSTAR campaign in 2011 concentrated on active edge-localized mode (ELM)
control by various methods such as non-axisymmetric magnetic perturbations, supersonic …
control by various methods such as non-axisymmetric magnetic perturbations, supersonic …