Depending on the expanding application areas of glass fiber reinforced composite
materials, quality machining of such materials also receives increasing interest. However …

In the high-speed machining of hardened steel for the die and mould industry, determining
how to reduce the wear of coated carbide tools and improve their machining efficiency and …

The cutting force provides significant information to help understand the machining process,
optimization, tool condition monitoring, tool design and others. Hence, various methods of …

This paper describes the wear mechanism and tool life when machining Hastelloy C-22HS
with coated carbide. The experiment was conducted using four different cutting tool …

Milling of hardened steel generates excessive heat during the chip formation process, which
increases the temperature of cutting tool and accelerates tool wear. Application of …

The present paper aims to study the machinability of Ti-6Al-4 V alloy with PVD TiAlN/NbN
coated tungsten carbide insert under cryogenic treated (ie 24 h & 48 h) and untreated …

The wear mechanism of TiN-coated carbide and uncoated cermets tools were investigated
at various combinations of cutting speed, feed rate, and depth of cut for end milling of …

WC–5TiC–10Co ultrafine cemented carbides were prepared and used for the cutting tool for
AISI H13 hardened steel. The effect of cutting parameters on the tool life and tool wear …

In the present study, a strain gauge-based low-priced dynamometer and a customized data
acquisition system are developed to simultaneously measure torque and tri-axial cutting …

Stellite alloys, which have been widely used in the aerospace, automotive and chemical
industries, are hard-to-cut cobalt-based materials. This study investigates the machinability …