Laser cladding technology is a reliable and efficient surface modification technology, which
has been widely used in surface alloying and composite processing of steel materials …

Flotation tailings are a secondary iron ore resource with abundant reserves and recycling
value. In this study, low-grade flotation tailings (TFe= 21.86%) with silica of 57.85% has …

The challenges of micro-pores resistant to closure and significant ductility loss during the
pressureless sintering of titanium (Ti) alloy powder mixtures have been overcome through …

This work investigated the fatigue crack initiation mechanism of the equiaxed Ti-6Al-4V alloy
in the very high cycle fatigue (VCHF) regime. Ultrasonic fatigue experiments were carried …

The fracture surface characteristics and the associated micromechanisms governing the fish-
eye crack initiation of a Ti-6Al-4V alloy under very high cycle fatigue (VHCF) loading are …

Powder metallurgy (PM) α+ β Ti-4Al-4Mo-4Sn-0.5 Si alloys were fabricated through
thermomechanical powder consolidation of TiH 2-based powder compacts with two different …

A powder metallurgy (PM) Ti–6Al–4V alloy with a novel discontinuous lamellar
microstructure and a high relative density was fabricated by thermomechanical powder …

The development and utilization of low-grade iron-bearing solid waste resources have
become increasingly urgent from both environmental and resource utilization perspectives …

The influence of microstructural attributes on fatigue crack propagation in titanium matrix
composite remains largely unexplored. The impact of α-lamella crystallographic and spatial …

Very high cycle fatigue (VHCF) properties and damage mechanisms were investigated for a
Ti-6Al-4V alloy with needle-like β phase. It was revealed that the fatigue damage is …