Since its introduction in membrane technology in the 1960's, phase inversion by means of
immersion precipitation has been widely studied for the preparation of membranes to be …

Carbon dioxide (CO 2) emissions have been the root cause for anthropogenic climate
change. Decarbonisation strategies, particularly carbon capture and storage (CCS) are …

In this study, single-layer (SL) and dual-layer (DL) polyphenyl sulfone (PPSU) flat sheet
nanocomposite Janus membranes were fabricated via a combination of VIPS and NIPS …

Polymer-derived nitrogen-doped porous carbon networks display stable electrochemical
properties and have been extensively studied as electrode materials. However, the precise …

The introduction of patterns on a membrane-solute interface has been suggested as an
effective method to tackle the reduced flux and fouling issues. Herein, the effectiveness of …

The industrial importance of penetrable and/or impenetrable polymer systems is evident
when one faces with a huge number of publications considering various aspects of diffusion …

Polyacrylonitrile (PAN)/acrylonitrile butadiene rubber (NBR) blend membranes were
prepared by the phase inversion method using dimethylformamide as solvent. The blend …

Epoxy curing is a versatile chemistry that can be applied in membrane preparation, both via
phase inversion and interfacial polymerization. Here, fully epoxy-based TFC membranes are …

Membrane fouling is one of the most significant issues to overcome in membrane-based
technologies as it causes a decrease in the membrane flux and increases operational costs …

In this article, the structural changes of polyacrylonitrile (PAN) fibers at the key stages of wet
spinning are systemically studied. According to the X‐ray diffraction and scanning electron …